Loading ...
Loading ...
Loading ...
W415-1676 / A / 03.17.17
28
EN
6.4 SCREEN REPLACEMENT
A. Insert the handle and lift the screen slightly up to
remove the 2 screws on the bottom inside of the
screen frame, see Figure 1.
B. Removing the screen will result in the screen door
immediately rising, use caution. It is recommended to
have another person assist in holding the screen door
while the screen frame is removed.
C. Remove the 10 top and bottom screws and the 6 side
screws, see Figure 2.
D. Remove the screen from the frame and replace.
E. Reverse these steps to reinstall the screen frame onto the
appliance.
F. If the screen door becomes unbalanced, refer to the
"BALANCE WEIGHT ADJUSTMENT" section.
NOTE: Do not leave the doors slightly open. Ensure your
counter weights are balanced and the doors close properly.
WARNING: Risk of injury! Removing the screen will result in the counter weight to be out of balance,
this will cause the screen door to immediately rise after the frame is removed.
NOTE: It is recommended to have two people assist in removing the screen frame from the appliance.
FIG 2:
FIG 1:
Loading ...
Loading ...
Loading ...