Loading ...
Loading ...
Loading ...
3. WARRANTY
- 4 -
3.1 WARRANTY
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This warranty period covering labour is 12 months from
the date of purchase except where tools are hired out when the warranty period is 90 days from
the date of purchase. The warranty is extended to 24 months for parts only. This warranty does
not apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover
any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will
be quoted and made accordingly.
This warranty applies in lieu of any other warranty expressed or implied and variations of its
terms are not authorised.
Your Draper warranty is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
4. INTRODUCTION
4.1 SCOPE
This product is intended for trade use and has the quality and features to meet and exceed the
expectations of the most demanding user. Any application other than that it was intended for, is
considered misuse.
Designed to drill into wood, plastics, ceramics, and many metals (drill bits sold separately).
4.2 SPECIFICATION
Stock No. ........................................................... 95314......................................................... 95092
Part No. ......................................................... BD650/16E ............................................ DP650/16E
Rated voltage .................................................... 230V ........................................................... 230V
Rated frequency ................................................ 50Hz ........................................................... 50Hz
Rated input ........................................................650W .......................................................... 650W
Speed settings ......................................................16 ................................................................. 16
Revolutions per minute (no load) .............. 120-3,000min
-1
...................................120-3,000min
-1
Chuck capacity ................................................ 3-16mm .................................................... 3-16mm
Drilling capacity ..................................................19mm ........................................................ 19mm
Spindle taper ....................................................... MT2 ............................................................. MT2
Spindle travel .....................................................80mm ........................................................ 80mm
Throat ................................................................178mm ..................................................... 178mm
Column Ø ...........................................................80mm ........................................................ 80mm
Collar Ø .............................................................60mm ........................................................ 60mm
Chuck to table ..................................................323mm ..................................................... 648mm
Chuck to base ...................................................515mm ................................................... 1171mm
Table tilt ...............................................................±45° ............................................................. ±45°
Head rotation .......................................................360° ............................................................. 360°
Table rotation .......................................................360° ............................................................. 360°
Table dimensions ..........................................290x290mm .......................................... 290x290mm
Base dimensions ...........................................460x275mm .......................................... 460x275mm
Height ...............................................................1000mm .................................................. 1650mm
Sound power level............................................. 85db(A) .................................................... 85db(A)
Sound pressure level ........................................ 70db(A) .................................................... 70db(A)
Vibration level ................................................. <2.5m/s
2
................................................. <2.5m/s
2
Weight ...............................................................71kgs ......................................................... 78kgs
4.3 HANDLING & STORAGE
– Care must be taken when handling this product.
● Dropping this power tool could have an effect on its accuracy and could also result in personal
injury. This product is not a toy and must be respected.
– Environmental conditions can have a detrimental effect on this product if neglected.
● Exposure to damp air can gradually corrode components.
● If the product is unprotected from dust and debris, components will become clogged.
● If not cleaned and maintained correctly or regularly, the machine will not perform at its best.
* Continuous A-Weighted Sound Pressure Level at the workstation in accordance to prEN ISO 15744:1999
and declared according to EN ISO 4871.
** A-Weighted Sound Power Level in accordance to prEN ISO 15744:1999 and declared according to EN ISO 4871.
- 5 -
Loading ...
Loading ...
Loading ...