Loading ...
Loading ...
Loading ...
- 20 -
11.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will keep
your tool in good working condition.
The motor must be correctly ventilated during tool operation. For this reason avoid blocking the air
inlets. After use disconnect the tool from the power supply and vacuum the ventilation slots.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
At regular interval, lubricate the spindle with a medium purpose grease. With the pulley cover
open, pack the grease down the centre of the front pulley. Operate the plunger mechanism and
brush a thin film of grease on the quill. Clean any debris built up in the pulley housing. Spray a
general purpose lubricating agent/rust inhibitor on the other moving parts and machined surfaces.
FIG.20
FIG.21
11. MAINTENANCE
11.2 ARBOR REMOVAL - FIGS. 20 - 21
To aid removal of the arbor from the spindle a drift key
is supplied.
Lower the spindle with the plunge handles to expose
slot (AJ). Rotate the spindle to align the inner and
outer slots.
Insert the drift key and allow the spindle to raise. Tap
the drift key while supporting the chuck.
- 21 -
12. OPTIONAL ACCESSORIES
12.1 OPTIONAL ACCESSORIES
A range of drill bits and accessories are available from your local Draper Stockist.
Please visit our website for details: www.drapertools.com
Loading ...
Loading ...
Loading ...