Loading ...
Loading ...
Loading ...
~ 131 ~
ERROR CODE
POSSIBLE CAUSE(S)
MEASURE(S)
F 14
1. Door opening alarm.
2. Press the « START / PAUSE »
- BUTTON The appliance
tries to open the door. The
error code remains until the
door lock is deactivated. Or
turn the rotary knob to
position « OFF » for at least 3
seconds to switch off the
appliance. Start a
programme. The error code
goes off.
Unb
1. Unbalance alarm: laundry in
the drum is not distributed.
1. Turn the rotary knob to
position « OFF » for at least 3
seconds to switch off the
appliance. Open the
appliance. Remove the
laundry, shake it out and put
it back into the drum. Set the
programme « SPIN » and
start the programme.
If the problem cannot be
solved, switch off and
unplug the appliance, close
the water tap and contact the
aftersales service.
2. Unbalance alarm: too little
laundry. If the laundry load
in the appliance is too low
to reach a balance of the
drum, the spin cycle may
not start. Then you have to
reload laundry.
2. Turn the rotary knob to
position « OFF » for at least 3
seconds to switch off the
appliance. Open the
appliance. Reload laundry
and start a programme.
If the problem cannot be
solved, switch off and
unplug the appliance, close
the water tap and contact the
aftersales service.
If you have checked all items on the above schedule but the problem still exists,
please contact the aftersales service.
Loading ...
Loading ...
Loading ...