Loading ...
Loading ...
Loading ...
~ 125 ~
4. Clean the internal filter and reconnect the water inlet hose to the tap.
5. Remove the water inlet hose from the washing machine.
6. Remove the filter (A) from the water valve (B) using a universal pliers; s. fig.
below.
Fig. similar: fig. serve as an example only.
A
FILTER
B
VALVE OF THE WATER INLET
7. Clean the filter using some water and a toothbrush.
8. Reinstall the filter properly.
9. Reconnect the water inlet hose to the appliance again.
10. Open the tap and make sure that the connections (hose - tap / hose - washing
machine) are properly installed and watertight.
7.5 Programme « DRUM CLEAN »
❖ Contaminations and bacterial residues may accumulate in the washing drum
and / or hoses of the appliance after some time, especially then you mainly use
low temperature programmes.
The washing drum should be cleaned at least once a month.
The programme « DRUM CLEAN » cleans the outside and inside of the washing
drum.
For cleaning the drum, you can add a fair amount of chlorine bleach to the
washing machine (please always observe to the information given by the
manufacturer of the chlorine bleach).
Do not use any additional washing agent.
Loading ...
Loading ...
Loading ...