Loading ...
Loading ...
Loading ...
~ 114 ~
4.7 Selection of a new washing programme / washing function
❖ You must switch off the appliance first to cancel the old settings and to be able
to make new settings.
1. During a washing cycle, turn the rotary knob for the programme selection to the
position the « OFF ». Leave the rotary knob in this position for at least 3 seconds
to switch off the appliance and cancel all settings.
2. Set a new programme and new washing functions if desired.
3. If needed, set a new spin speed.
4. Please note: do not add more detergent.
5. Press the « START / PAUSE » - BUTTON to start the new programme.
4.8 Reload laundry
WARNING! If you stop a running programme, the temperature of the
water, the laundry and the drum can be very high. Be very careful while
removing the laundry. RISK OF SCALDING! RISK OF BURNS!
It is very important to check the water level and the temperature of the
water in the washing drum before opening the door.
TO RELOAD LAUNDRY DURING A RUNNING PROGRAMME, PROCEED AS
FOLLOWS
1. Press the « START / PAUSE » - BUTTON once. The washing cycle is interrupted.
2. If the running washing programme permits the deactivation of the door lock, the
operational status indicator of the door lock flashes; requirements: the
temperature in the washing drum is less than 50 °C and / or the current washing
programme has not progressed too far.
3. The door lock is deactivated automatically after approx. 2 minutes. The
operational status indicator of the door lock « » goes off.
4. Open the door
5. Reload the laundry and close the door.
6. Press the « START / PAUSE » - BUTTON to reactivate the programme.
If the door lock will not be released and the door cannot be opened, the
temperature inside the washing drum is more than 50 °C or the current washing
programme has progressed too far.
NOTICE! It is not possible to open the door while the door lock indicator is
on. Do not open the door by force. To open the door by force can damage
the appliance seriously. RISK OF DAMAGE!
Loading ...
Loading ...
Loading ...