Loading ...
Loading ...
Loading ...
~ 124 ~
Fig. similar: fig. serve as an example only.
10. Check that the drain pump filter is installed properly.
11. Install the cover panel.
12. Select a washing programme and start it.
7.3 Residual water drainage
1. Switch off the appliance and disconnect it from the mains.
2. Remove the cover of the drain pump filter; s. chapter 7.2 CLEANING / REMOVING
OF THE DRAIN PUMP FILTER.
3. Place a container in front of the opening.
4. Open the drain pump filter, but do not remove it completely. Rotate the drain
pump filter in anti-clockwise direction until the water begins to run.
5. Wait until the water has drained completely.
6. Unscrew the drain pump filter completely and remove it.
7. Carefully tilt the appliance forward so the water can be drained.
8. Insert the drain pump filter and screw it in as far as possible in clockwise direction.
9. Check that the drain pump filter is installed properly.
10. Install the cover.
WARNING! Ensure before residual water drainage that the water has
cooled down completely. RISK OF SCALDING! RISK OF BURNS!
7.4 Cleaning of the water inlet valve
The water inlet valve should be cleaned at least once every six months.
The water inlet valve has to be cleaned, when it is not or improperly supplied with
water with the tap opened.
1. Close the water tap.
2. Disconnect the appliance from the mains (unplug).
3. Remove the water inlet hose from the tap.
Loading ...
Loading ...
Loading ...