Loading ...
Loading ...
Loading ...
~ 129 ~
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
8.2 Error codes
ERROR CODE
POSSIBLE CAUSE(S)
MEASURE(S)
F 01
Problems with
the water
inlet.
1. Water tap closed.
1. Open the water tap.
2. Water pressure too low.
2. Wait some time.
3. Water inlet hose is frozen.
3. Defrost the water inlet hose.
4. Filter is blocked.
4. Remove the filters and clean
them.
F 03
Problems with
the water
outlet.
1. The « START /
PAUSE » - button is pressed
and the programme is
paused.
1. Press « START
/ PAUSE » - button again to
reactivate the set
programme.
2. Water drain hose was
installed too high.
2. Max. height 125 cm.
3. Water drain hose is frozen.
3. Defrost the water drain hose.
4. Water drain hose is
blocked.
4. Remove the blockage and
clean the hose.
5. Water discharge is blocked.
5. Remove the blockage and
clean the water discharge.
6. Drain pump filter is
blocked.
6. Remove the drain pump
filter and clean it.
F 04 / F 05
F 06 / F 07
F 23
The display
indicates one
of the error
codes above.
1. Failure of the electronic
module.
1. Turn the rotary knob to
position « OFF » for at least 3
seconds to switch off the
appliance. Set a program; e.g.
« SPIN ». When the display
no longer indicates an error
code, press the « START
/ PAUSE » - BUTTON to start
the programme.
If the problem cannot be
solved, switch off and
unplug the appliance, close
the water tap and contact the
aftersales service.
Loading ...
Loading ...
Loading ...