Loading ...
Loading ...
Loading ...
Water Level Control
The Water Level control provides the proper amount of wash and rinse water
when set for specific wash load sizes. This control allows you to conserve water
and achieve the best washing results. (NOTE: If more than one Water Level
control button is pushed, the washer will not fill.)
The Water Level control can be set at the settings indicated. The bulkiness of
wash loads is important when determining a water level. Articles that absorb a
large amount of water, such as blankets and rugs require more water. For best
results when washing bulky items, set the Water Level for the largest possible
anaount of water.
Bleach Dispenser
When using bleach, add it to the wash tub before clothes are added. To add
bleach, use the Bleach Dispenser located in the left front comer of the machine
under the lid. Always use the LARGE Water Level setting when using bleach.
Measure liquid bleach in a measuring cup. Use 3/4 cup for small loads, 1 cup
for large loads and 1 1/4 cups cups for extra large loads. Pour the bleach directly
into the dispenser, then pour in one cup of water.
The bleach dispenser automatically dispenses the diluted liquid bleach into the
wash water.
Powdered bleach must not be used in the Bleach Dispenser. Before adding
articles, add powdered bleach to the wash water following directions on the
package.
Fabric Softener Dispenser
If desired, fabric softener can be added to the final rinse w_ter through the Fabric
Softener Dispenser.
After loading, but before starting the washer, place the dispenser on top of the
agitator. Press down gently until the dispenser is firmly seated in place.
Following label directions, pour recommended amount of softener for one load
into the dispenser. Add water to bring the liquid level to the top point in center
of dispenser. Do not fill the dispenser above this level. Do not stop and restart
washer during spin when the fabric softener dispenser is in use. The fabric
softener solution is spun out of the center cup at the beginning of the first spin
and is retained in the outer shell. When wash spin stops, the solution is released
into the final rinse water.
Clean the Fabric Softener Dispenser occasionally by thoroughly flushing it out
with warm water. Run the washer through a short but complete wash cycle to
remove the water and fabric softener.
i :;: i_ : :.... :••• • •::.... :i:i•:i
, _••: i,!2 .... • •.•_•• •:_:
Loading ...
Loading ...
Loading ...