Loading ...
Loading ...
Loading ...
Avoid Service
Ch-eckli-st
Before you call for service, review this list. It lnay save you time and expense.
The list includes common occurrences that are not the result of defective
workmanship or materials in this appliance.
FIND YOUR PROBLEM
HERE
POSSIBLE CAUSE
HOW TO FIX IT
OPERATING PROBLEMS IN THE WASHER
Washer does not start. Washer may not be plugged in or Make sure the plug is tightly pushed
connection may be loose, into wall outlet.
House fuse blown or circuit breaker
tripped.
Check!reset circuit breaker and/or
replace fuse. Do not hacrease fuse
capacity. If the problem is a circuit
overload, have corrected by a
qualified electrician.
Power outage. Check house lights. Call local electric company.
Timer knob not in correct position. Turn timer knob slightly past desired
position and pull knob out.
The wash cycle is in a pause stage. This is normal. A pause occurs
between each wash and spin.
Motor is overheated. The washer motor will stop if it
becomes overheated. It will
automatically restart after a
cooldown period of up to 30 minutes
if the timer has not been manually
turned off during this time.
Washer won't enter spin cycle. Lid is not securely dosed.
Close lid securely.
WATER PROBLEMS
Water does not enter the
washer, or it enters slowly.
Water supply is not adequate in the
area.
Check another faucet in the home.
Wait until water supply and pressure
increase.
Hot and cold water supply faucets are Fully open hot and cold faucets.
not completely open.
Water is being used elsewhere in the Waterpressuremustbeat least30psi.
house. Try not to run water elsewhere in the
home while the washer is filling.
Water inlet hoses are kinked. Straighten hoses.
More than one Water Level control Carefully push only one Water Level
button has been pushed, control button.
More than one Water Temperature Carefully push only one Water
control button has been pushed. Temperature control button.
18
Loading ...
Loading ...
Loading ...