Loading ...
Loading ...
Loading ...
i:::Cycle Selections : For best results, follow fabric care label directions on specific articles to be
:::_----- .... ..... dfied.-Check-the-,,Control-Settings-_hartU-and-_the-Total-L-aundryC-are-book
i
.... if the care label is not available.
?
NOTE: The Fabric Temperature
]control should be set to proper
i [temperaturefor each load.
Fabric Temperature Control
Before selecting the dryer cycle, push the Fabric Temperature control button
above the desired temperature. HIGH, MEDIUM or LOW temperature
settings may be used with any cycle setting. The AIR FLUFF (no Heat)
temperature setting should only be used in the Timed Dry cycle. (NOTE: If
more than one Fabric Temperature control button is pushed, the dryer will not
heat.) Refer to the "Control Settings Chart" for suggested settings according to
fabric type.
The AIR FLUFF setting tumbles the load without heat. Use AIR FLUFF to
fluff or freshen pillows and blankets and dust draperies and clothing. Use this
no heat setting only for heat-sensitive items such as plastics, foam rubber or
similarly textured, rubber-like materials. To absorb excess moisture, add
several dry bath towels to the load.
After selecting the temperature setting, turn the timer knob clockwise to the
desired cycle and time.
The Timed Dry cycle provides up to 100 minutes of timed drying at the selected
high. medium or low temperature.
Automatic Regular cycle provides drying at the heated temperature selection
of your choice. The Automatic Dry cycle deterufines drying time automatically
When the items are dry, the heat automatically shuts off and the load is tumbled
for approximately 5 minutes without heat to reduce wrinkling.
, When using the Automatic Regular cycle for the first time, set the Cycle
Selector about halfway between MORE DRY and LESS DRY. Experience
will determine if adjustments are needed for future loads. This cycle works
best with items of similar fabric, weight mad construction.
12
Loading ...
Loading ...
Loading ...