Loading ...
Loading ...
Loading ...
FIND YOUR PROBLEM POSSIBLE CAUSE HOW TO FIX IT
HERE
OPERATING PROBLEMS
Dryer runs, but takes an excessive Dryer is connected to a 208 volt Drying time willbe 20 percent longer
amount of time to dry clothes, circuit (electric models only), than when dried on a 240 volt circuit.
Exhaust duct is too long.
Refer to Installation Instructions for
maximum length and specifications
of rigid and metal flexible ducts.
Install the dryer accordingly.
Exhaust duct is too small. Minimum required exhaust diameter
is 4 inches. Do not use a smaller duct.
Exhaust duct has more than two The maximum number of 90 ° bends
bends, allowed in the exhaust duct is two.
Relocate the dryer to comply to these
requirements.
Exhaust duct and/or lint screen Have duct and/or lint screen housing
housingis cloggedor restricted, cleaned by qualified service
personnel.
Lint screen is clogged with lint. Clean lint screen. Lint screen must be
cleaned after every load.
Dryer is overloaded. Refer to Total Laundry Care book
for load size.
Heavy items were not sorted from Refer to Total Laundry Care book
lightweight items, for sorting recommendations.
Low heat selected. The Low Heat setting, which is safe
for delicate and knit items, requires
longer drying periods.
Dryer runs, but is not heating. See "Dryer runs but won't heat" on
previous page.
High humidity. Drying times will be longer in areas
where humidity is high.
Use a dehumidifier near the dryer
location to help reduce the humidity.
Washer not spinning water out of See washer operating instructions.
clothes.
23
Loading ...
Loading ...
Loading ...