Loading ...
Loading ...
Loading ...
FIND YOUR PROBLEM POSSIBLE CAUSE HOW TO FIX IT
HERE
Clothes too wet after spin.
Drain hose is kinked.
Straighten drain hose.
Cold rinse water used.
This is normal. Cold rinses save
energy and reduce wrinkling, but the
clothes tend to feel wetter.
Wash and rinse water temper- The hot water hose and cold water Connect the hot water hose to the hot
atures are incorrect, hose are connected to the wrong water faucet and the cold water hose
supply faucets, to the cold water faucet.
Water is entering washer hut Standpipe for the drain hose is not the Standpipe must be a minimum of 33"
tub does not fill. correct height, high.
Oversudsing. Too muchdetergent. Follow package directions for
recommended amounts of detergent.
To remove the suds, stop machine mad
advance the timer to last rinse which
should flush out the extra suds. See
"To Recondition Clothes" in Total
Laundry Care book.
Detergent is not compatible with A low-sudsing detergent may be
water conditions, necessary in special soft water
conditions.
Items were pretreated before When pretreating, laundry aids will
washing, remain in items. Use less detergent
than recolmnended.
Laundry products such as oxygen Reduce the amount of detergent when
bleach may cause additional sudsing, additional laundry aids are used.
Permanent press items become
wrinkled in tile washer.
Washer is overloaded.
Do not overload the washer. See
Total Laundry Care book.
Insufficient water level. Wash small loads with maximum
water setting.
Incorrect rinse water temperature. Use cold water rinse only. Make sure
water hoses are connected to proper
faucets.
Items left in the washer too long after Remove items when cycle is
cycle is completed, completed.
2O
Loading ...
Loading ...
Loading ...