Loading ...
Loading ...
Loading ...
OPERATION
,, ,, ,,,,,,,,,,,, i,,,11,
TO ADJUST GAUGE WHEELS (See Fig. 7)
Adjust gauge wheel s with trac|or on a flat level suriace
• Adjust mower to desired cutting height:
• Lower mower w_th lift control Remove rear relainer
spring and clevts pin which secure eac:h gauge wheet
. Lower gauge wheels to ground Raise gauge wheels
slightly to align holes in bracket and gauge wheel bar
and insert clevis pins Gauge wheels should be slightly
off the ground_
• Repiace retainer springs lnto clevis pins
RETAINER
SPRING _,_
GAUGE
WHEEL BAR
GAUGE
WHEEL
FIG. 7
TO OPERATE MOWER (See Figs. 5 and 6)
Your tractor isequipped With an operaloi'presence sensing
sw teh. Any attempt by the operator to leave the seal wilh
the engine running and the attachment cLutc_engaged w II
shut elf the engine,
• Select desired height of cuL
• Lower mower with altachment lift control,
• Start mower blades by eng&ging altachment clutch
control
,. TO STOP MOWER BLADES - disengageaftachment
clutch control,
l _ CAUTION: Do'not operate the m_wer_
without either the entire grass catcher, !
. on mowers so equipped, or the dis- !
charge guard in place. . . I
. m _ m " =J
RUNNER
GUARD
FIGo 8
TO OPERATE ON HILLS
I CAUTION: Do not drive up or down !
hills with SlOpes greater than 15° and
I
do not drive aci'oss any slope. •
,_ Choose the slowest speed before stading up or down
hi_ls°
• Avoid stopping or changing speed on httls,
• if sldw]ng is necessary, move throttle control lever to
slower position.
• If stopping is absolutely necessary, push clutch/brake
pedal quickly to brake posilion and engage parking
brake
• Move motion control lever to neutral (N) pos_tiorl,
IMPORTANT: THE MOTION CONTROL LEVER DOES
NOT RETURN TO NEUTRAL IN) POSITION WHEN TH 5
CLUTCHtBRAKE PEDAL iS DEPRESSED
" To restart movement, slowly release parking brake and
clutch!brake pedal
• Slewty m0ve motion control lever to slowest setting.
• Make all turns slowly
TO TRANSPORT (See Figs, 5 and 9)
When pushing or lowing your tractor, be sure 1odisengage
t[ar_smisslon by placing freewhee! control in treewheeling
posltion_ Free wheel conlrot is tocaled at the rear drawbar
of traclor
• Raise altachment tilt to highest PoStiion with-attach-
ment lift control/
• Remove retainer spring from freewheel cohlroI rod.
• Push control rod tn'.to disengage transmission and
retnsert retainer spring inl0 control rod hole now on
back Side of lhe bracket
• Do not push or low tractor at more than ly¢o (2) MPH
• To reengage transmission, reverse above procedure
NOTE: To protect hood from damage when transpodtng
your tractor on a truck or atra_ie[_be su re hocd is clese dand.
secured to tractor_ Use an eppropriate means of tying hood
to lractor (rope; cord, etc ),
14 FIG, g
Loading ...
Loading ...
Loading ...