Loading ...
Loading ...
Loading ...
29
Care and Cleaning
Care and cleaning tips
Part Cleaning Agents Tips and Precautions
Interior &
Door Liners
• Soap and water
• Baking soda and
water
• Use two tablespoons of baking soda in one
quart of warm water.
• Be sure to wring excess water out of sponge or
cloth before cleaning around controls, light bulb
or any electrical part.
Door Gaskets • Soap and water • Wipe gaskets with a clean soft cloth.
Drawers &
Bins
• Soap and water • Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins,
drawers, etc.) in dishwasher.
Glass Shelves • Soap and water
• Glass cleaner
• Mild liquid sprays
• Allow glass to warm to room temperature before
immersing in warm water.
Toe Grille • Soap and water
• Mild liquid sprays
• Vacuum
• Remove toe grille (see Installation Instructions).
• Vacuum both sides and wipe with sudsy cloth or
sponge. Rinse and dry.
Exterior &
Handles
• Soap and water
• Non abrasive glass
cleaner
• Do not use commercial household cleaners containing
ammonia, bleach or alcohol to clean handles.
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
Exterior &
Handles
(Stainless
Steel Models
Only)
• Soap and water
• Stainless steel
cleaners
• Never use CHLORIDE or cleaners with bleach to
clean stainless steel.
• Clean stainless steel front and handles with non-
abrasive soapy water and a dishcloth. Rinse with
clean water and a soft cloth.
• Use a non-abrasive stainless steel cleaner.
These cleaners can be purchased at most home
improvement or major department stores. Always
follow manufacturer’s instruction. Do not use
household cleaners containing ammonia or bleach.
• NOTE: Always clean, wipe and dry with grain to
prevent scratching.
• Wash the rest of the cabinet with warm water
and mild liquid detergent. Rinse well and wipe
dry with a clean soft cloth.
Push Upward Until The
Extension Snaps In Place
Ice Chute
Extension
The ice chute
extension is designed
to better direct ice
flow into containers.
Pull Down
Press Here
Firmly
Removing the Ice Chute
Extension For Cleaning
1 Turn the
refrigerator
off using the
button on
the control
panel (refer
to Owner’s
Manual).
2 Press
inward
firmly on
the front of
the chute
and pull down.
3 Turn your refrigerator back on.
Installing the Ice Chute
Extension
1 Turn the refrigerator off using the
button on the control panel (refer to
Owner’s Manual).
2 Align the extension with the ice chute
so that the snap clips are just inside
the front edge of the chute.
3 Push upward until the extension
snaps into place.
4 Turn your refrigerator back on.
Loading ...
Loading ...
Loading ...