Loading ...
Loading ...
Loading ...
25
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
Specifications
The cooler turns on and
off frequently
The room temperature is
hotter than normal.
Make sure that the door was properly installed.
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The door gaskets do not seal
properly.
Clean the door gaskets.
The temperature control is set
too warm.
Set the control to a colder setting.
The kegerator/beverage
cooler makes unusual
noises or vibrates
The kegerator/beverage cooler
may not be level on the floor.
Level the kegerator/beverage cooler with the leveling feet.
The body of the
kegerator/beverage cooler is
touching a wall.
Move the kegerator/beverage cooler out from the wall.
• A rattling noise may be
heard. This is caused by the
flow of refrigerent in the
kegerator/beverage cooler.
• As each cooling cycle ends,
you may hear gurgling
sounds.
• Contraction and expansion
of the inside walls may
cause popping or crackling
noises.
This is normal.
Moisture is building up
in the interior of the
cooler
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is very humid.
Move the cooler to a dryer location.
The bottles in the cooler is not
packaged properly.
Rearrange the bottles in the cooler to make sure that it is
sealed.
Dimensions (HxWxD) 33.7 x 23.6 x 23.6 in. (85.5 x 60.0 x 60.0 cm)
Weight Single tap - 101.4 lbs. (46 kg)
Dual tap - 103.6 lbs. (47 kg)
Power requirements 115V~60Hz
Current 0.86 A
Power consumption (annual) 310 kwh
Problem Possible cause Possible solution
Loading ...
Loading ...
Loading ...