Loading ...
Loading ...
Loading ...
11
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
Assembling your kegerator/beverage
cooler
Installing the casters (optional)
1 Remove all contents of the kegerator/beverage cooler and tip it onto
its back.
2 Attach the two metal washers (included) to the locking casters to
prevent scratching the cabinet, then install the two locking casters in
the front positions on the bottom of the kegerator/beverage cooler.
You will have to puncture the white plastic.
3 Install the other two casters in the rear positions on the bottom of the
kegerator/beverage cooler.
4 Unscrew and remove the black front feet. Keep them in a safe place in
case you want to remove the casters and use the front feet.
5 With all four casters tightened evenly, stand the unit in the upright
position.
Notes
• The kegerator/beverage cooler should always be plugged
into its own individual electrical outlet which has a voltage
rating that matches the rating plate.
• We strongly recommend that you do not use an extension
cord. However, if you must use an extension cord, it is
absolutely essential that it be a UL/CUL-Listed, 3-wire
grounding type appliance extension cord having a
grounding type plug and outlet and that the electrical
rating of the cord be 115 volts and at least 10 amperes.
• Never unplug your kegerator/beverage cooler by pulling on
the power cord. Always grip the plug firmly and pull
straight out from the outlet.
Casters
Locking casters
Loading ...
Loading ...
Loading ...