Loading ...
Loading ...
Loading ...
12
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
6 Step on the front of the locking casters to lock the kegerator/beverage
cooler into place or step on the back to unlock the kegerator/beverage
cooler.
Attaching the guard rail
• Insert the guard rail into the holes on the top of the kegerator/beverage
cooler.
Installing the draft arm assembly
1 Remove the round cabinet plug from the top of the
kegerator/beverage cooler. You may need to push the cabinet plug up
from the inside. Store the plug in a safe place because you will need it
to convert the beer dispenser into a beverage cooler.
Single-tap model:
a Place the single-tap beer tap gasket over the opening, aligning the
shapes with the shapes in the gasket.
b Pass both the wing nut and the beer tube (attached to the draft
arm assembly) through the opening until the draft arm assembly is
resting on the top of the cabinet.
c Rotate the draft arm 60 degrees until the tap is facing the front. It
may take some force.
d Continue to step 2 on the next page.
Dual-tap model:
a Place the dual-tap beer tap gasket over the opening, aligning the
four holes with the holes on the top of the cabinet.
b Pass both the wing nuts and the beer tubes (attached to the draft
arm assembly) through the opening until the draft arm assembly is
resting on the top of the cabinet.
c Align the holes in the draft arm with the holes in the gasket.
Loading ...
Loading ...
Loading ...