Loading ...
Loading ...
Loading ...
16
Insignia Single- and Dual-Tap Kegerator/Beverage Cooler
www.insigniaproducts.com
6 Feed a hose clamp over the non-threaded ends of the other two CO
2
gas lines.
7 Connect the gas lines to the ends of the T-connector, then tighten the
hose clamps. Leave about ½ inch between the top of the clamp and
the end of the hose.
8 Attach the CO
2
regulator to the CO
2
tank by screwing the regulator nut
onto the CO
2
tank valve and tightening with an adjustable wrench.
(Optional) This unit allows you the option to install the CO
2
tank
retainer on the back to provide for extra space inside the unit. An
additional CO
2
back-tank retainer is included in the accessories.
Attach the CO
2
tank
You have two options:
A. Inside the kegerator for a cleaner look. Attach the tank through the
retainer and secure it with the provided bolt and nut. Position the tank so
you can read the gauge and have easy access to the shut-off valve.
B. On the back of the kegerator if you need extra space inside.
1 Align the four holes on the CO
2
tank retainer with the four screws on
the back of the kegerator.
2 Place the CO
2
tank in the retainer.
3 Feed the gas line hose through the hole in the back of the unit and
connect to the regulator as you did in the steps above.
Loading ...
Loading ...
Loading ...