Loading ...
Loading ...
Loading ...
sing Your Refrigerator
Dispenser/ice maker operating tips
PROBLEM CAUSE SOLUTION
Dispensers • Freezer door open • Close the freezer door.
won't work
Ice dispenser • Ice bin not properly • Make sure ice bin is pushed in all the way.
won't work installed
• Wrong ice in bin •
Off-taste or
odor in ice
• Dispenser not used
for extended periods of
time, causing ice cubes
to melt together
• Ice dispenser bar held
in too long
• Low water pressure
Use only crescents from ice maker. Shake ice bin
occasionally to keep cubes separated and to obtain
increased storage capacity.
Dump old ice and make a new supply.
• Wait about three minutes for the dispenser motor to reset.
• Large amounts of ice should be taken from the bin, not
through the dispenser.
• Call local utility company.
• Ice attracts airborne
odors; old ice
• Water quality
• Foods not properly
wrapped
• Ice bin and freezer may
need cleaning
• Plumbing to ice maker
• New ice maker
• Dump old ice and make a new supply; store excess ice in
a covered container.
• For best results, avoid connecting ice maker to a softened
water supply. If softened water supply cannot be avoided,
make sure the water softener is well maintained and
operating properly.
• Wrap foods properly in air and moisture proof materials.
• Clean freezer and ice bin. See "Cleaning the refrigerator"
on page 19 for instructions.
• Follow Installation Instructions for proper ice maker water
supply hookup.
• The first few batches of ice from a new ice maker may
have an off-taste. Dump this ice and make a new supply.
15
Loading ...
Loading ...
Loading ...