Loading ...
Loading ...
Loading ...
7
Before Using for the First Time
1. Carefully unpack the Double Rotating Wafe Maker and remove all packaging and materials.
2. Set the Double Rotating Wafe Maker on a dry, clean and at surface.
3. Wipe outer surfaces with a slightly damp, soft cloth or sponge.
4. Press the top plate release button and lift the top cooking plate to expose the upper wafe
compartment #1 (see g 2). Wipe the cooking plates with a damp cloth to remove all dust,
and then dry.
5. Lower the top cooking plate to close the Double Rotating Wafe Maker and rotate
thehandle (in the direction of the arrow) 180° to the bottom side.
6. Press the top plate release button and lift the top cooking plate to expose the lower wafe
compartment #2 (see g 3). Wipe the cooking plates with a damp cloth to remove all dust,
andthen dry. Close the lid and rotate the unit 180° counter-clockwise to the top side.
7. CAUTION: Take care to prevent water from running into the appliance. NEVER IMMERSE
THE DOUBLE ROTATING WAFFLE MAKER BODY IN WATER OR ANY OTHER LIQUIDS!
8. NOTE: When your Double Rotating Wafe Maker is heated for the rst time, it may emit
slight smoke or odor. This is normal and should disappear after one or two uses. This does
not affect the safety of the appliance. However, as it may affect the avor of the rst wafes
prepared in the Double Rotating Wafe Maker, it is recommended that these be discarded.
9. Keep the Wafe Maker closed until use.
Fig. 2
Fig. 3
Loading ...
Loading ...
Loading ...