Loading ...
Loading ...
Loading ...
illll ii,i i
ASSEMBLY
HOW TO ASSEMBLE THE STEERING WHEEL
Use the fasteners shown below to instatlthe steering wheel, The
fasteners are shown at full size.
(A)
lx102
1 Make sure the frontwheels point forward
(B)
15x88
2 Some models have an optional bellows, Slide the bellows
overthe steering post. Make sure the collar ofthe bellows is
on top(Figure 3)
3 Attach the steering wheel tothesteering post withthefasten-
ers Tighten the fasteners.
SteeringWheel
Steering Post
B
Bellows
(Optional)
Figure 3
CHECK THE TIRES
Check the airpressure inthe tires Tires withtoo much air pressure
will cause the unit to ride rough Also, the wrong air pressure will
keep the mower housing from cutting level. The correct air pressure
(PSD isas follows, i ....
Front Tires : :22 PS1(1.5 BAR)
Rear Tires 14 PSI (1 BAR)
CHECK THE DRIVE BRAKE
The drive brake Can be easily checked as follows.
1 Set the parking brake. See page 13.
2 Move the shift lever to the neutral (N) position
3. Push the unit
4 If the rear wheels rotate, adjust the drive brake See "How To
Check And Adjust The Drive Brake" in the Customer
Responsibilities section.
CHECK THE BELTS
Check the routing of the belts. Make sure the belts are not twisted
Make sure the belts are inside all the belt guides (Figure 4).
Belt Guides_
MotionDriveBelt
BeltGuide
MowerDriveBelt
Transaxte Pulley
Idler Pulley
: i :¸ i • •
F-99636 9
Loading ...
Loading ...
Loading ...