Loading ...
Loading ...
Loading ...
PREPARATION
The unit is completely assembled except for the items shown in
Figure 1,These items are in the carton along with a parts bag The
parts bag contains the fasteners needed to complete the assembly
of the unit. Find and remove these items Do not discard any parts
or material until the unit is assembled
HOW TO REMOVE FROM THE CARTON
To remove the un!t fromthe carton, follow the instructions below.
1 Open the top 0{ the carton : ' :
2 Remove the wood frame at the top of the carton
3 Cut each corner of the carton from the top to the bottom with a
knife Lower the sides of the carton to the ground.
4. Move the shift lever to the neutral (N) position.
NOTE: See the Operation section, page 11,for the location
of the controls.
ASSEMBLY
5
If the parking brake is engaged, completely push the
clutch/brake pedal to release the brake
Move the lift lever to the highest position.
CAUTION: Check the bottom of the carton for staples,
Remove any staples that are in the path of the tires,
From the back of theriding mower, carefully pull the riding mow-
er backwards off the wood frame
6,
7.
TOOLS YOU NEED TO ASSEMBLE THE UNIT
1 Adjustable wrench (2 required)
2 Open end wrench 1/2" -9/16"
3. Open end wrench 7/16"-'{/2"
4. Blade type screwdriver
5. Phillips screwdriver
6 Low Tire pressure gauge
7 Knife
8 Socket Set (Optional)
SteeringWheel --
SeatBracket
Parts Bag
Owner's Manual
Figure 1
MOWER PARTS BAG - CONTENTS
The fasteners and other loose parts are shown below The fasteners are shown at full size The quantity is shown in brackets ().
On some models, all of the fasteners are not required
lx102
(I) Hex Bolt
5/16"-18x1_/2 "
STD523115
lx45
(2) Hex Bolt
_/le"-18x5i¢'
STD523106
I x38
(2)HexBolt
114"20x518°
STD523106
F-99636
2x_53 " 18x1_6
(3) Carriage Bolt (2) Lockwasher
STD533107 STD551131
15x88
(4)FlangeNut
51t6_-18
STD541431
Q
15x66
(2)Locknut
V4%-20
STD541425
%
54"148
(1)Cover,Battery
Terminal
91275
(2) Ignition Key
Loading ...
Loading ...
Loading ...