536270211 Owner's manual

Loading ...

OPERATION

HOW TO CHANGE THE MULCHER PLATE 3.

,_ WARNING: To prevent the engine from starting, dis-

connect the wire from the spark plug. Make sure the

attachment clutch is in the DISENGAGE position.

The mulcher plate letsyou mulch the grass for aclean, fine cut. To

discharge the grass out the side or into a grass bagger, remove the

mulcher plate as follows

How To Remove The Mulcher Plate

1. Raise the deflector. Remove the twowingnutsB and twocar-

riage boltsA (Figure 11)

Mufchef Plate

Slide the mulcher plate toward the front (Figure 12). Make

sure the tabs on the mufcher plate are not locked behind the

nuts.

To remove, slide forward

\ To install, slide backward

Nut

Mulcher Plate

Figure 12

Lift the mulcher plate away from the mower housing

(Figure I3)

Deflector

Mutcher Plate

Figure 13

4. Attach wingnuts B and carriage bolts A to the mulcher plate

for future use.

IMPORTANT: There are several different types of grass. Some

types of grass are more difficult to cut. If you remove the

mulcher plate and the grass does not discharge correctly,

replace the blade with a standard blade. The part number of the

standard blade is 56212E701.

How To Install The Mulcher Plate

1 Remove wingnuts B and carriage bolts A from the mulcher

plate.

2. Raise the deflector. Slidethe mulcher plate under thedeflec-

tor (Figure 13).

3. Push the mulcher plate tothe rear. (Figure 12). Make sure the

two tabs on the mulcher plate are lockedaround the two nuts

for the deflector bracket

4. Fasten the mulcher plate with two wingnuts A and two car-

dage bolts B (Figure 11).

F-99636 16

Loading ...

Owner's manual - Page 16