Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
HOW TO CLEAN THE AIR FILTERS
Some engines have two filters, an outer foam filter around an inner
paper filter Clean the air filters every 50 hours tf you operate in
dirty conditions, service more often
NOTE: Never run the engine with the airfilters removed. The air
filters witl help protect the engine against wear. For the correct
replacement filter, see the parts list for the engine.
1. Remove the two wlngnuts from the cover (Figure 27)
2. Remove the cover from the air cleaner
3. Remove the two nuts from the filters.
4. Remove the air filters.
5. Clean the inside of the base and the cover with a cloth.
6. Remove the foam filter from the paper filter.
7. Ifequipped,wash the foam filter in a detergent andwater solu-
tion. Toremove the water solution, tightly roll the foam filter in
adry cloth. Remove the foam filter from the cloth Completely
dry the foam filter
CAUTION: Do not wash the filters in gasoline or other
solvents that will burn.
8. Evenly apply SAE 30W oil to the dry foam filter
9. To clean the paper filter, lightly tap the paper filter against a
hard flat surface
10. Ifthe paper filter is very dirty, replace the paper filter
11. Assemble the air filters with the two nuts
12. Installthe cover Fastenthe cover with the two wingnuts
Wingnut
Cover
Foam Filter
Nut
Base
Figure 27
] I ]]
HOW TO CHECK THE SPARK PLUG
1
2.
Check the gap of the spark plug with a feeler gauge
(Figure 28). The correct gap is 0.030".
For easy starting and good performance, replace the spark
plug every two years.
Feeler Gauge
0 030"
Spark Ptug
Figure 28
F-99636 25
Loading ...
Loading ...
Loading ...