Stanley STR-4IN1 Original instructions

Loading ...

Store the appliance in a safe and dry place.

After an impact or other damages, check the machine for

damage.

Pay particular attention while trimming lawn edges,

gravel borders and similar places that stones and soil

could hurl away by the cutting line.

Never cross streets or roads with the device switched

on.

Never cut against hard objects such as stones, etc.

Thus you will prevent personal injury and damage to the

device.

Never use the device without protection device.

Never stop the cutter with your hands. Always wait until

it stops by itself.

Hold the cord head as close as possible to the ground.

Cut only grass that grows on the ground. Grass in wall

cracks or on stones may not be cut.

Always make sure that no objects etc. collect in the cord

head, in the protective cover or in the engine .

Operate the device only with protective device.

Always switch off the device before you turn it off.

Pay attention to risk of injury in the area of the cutting

device, which is used for cutting the thread.

Danger of kick-back! There is always kick-back hazard

if the cutting blade comes into contact with branches or

other objects. The brush cutter becomes uncontrollable

due to this and can pushed with great force in the

direction of the operator.

Do not use the device without and correctly installed

exhaust guard.

Do not touch the exhaust. Risk of burns.

Do not use a wire or similar things in the running-spool.

Never cut against hard objects such as stones, etc.

Thus you will prevent personal injury and damage to the

device.

Never use the device without protection device.

Always use only the original thread. Never use a metal

wire instead of the nylon thread.

The petrol-brush cutter is dependent on the mounted

cutting tool meant for trimming lawn or grass, for cutting

scrub, shrubs, bushes and young trees in the private

area.

The device must not be used for other purposes.

The manufacturer does not assume any liability in case

of Improper use as well as changes to the machine.

Please also note the safety instructions, the instructions

for installation and operation, as well as the other

generally applicable accident prevention regulations.

The appliance and the cutting tools must be regularly

and properly checked and maintained. Damages must be

repaired by a specialist workshop.

Use only accessories speciﬁed by the manufacturer.

Let your device repaired only by qualiﬁed personnel and

only with original spare parts. This is to ensure that the

safety of the device is maintained.

Make sure that the cutting tool is stopped when the

engine is idling.

Check this regularly and do not use the machine if

you detect a movement in the idle position. Bring the

machine to a specialist workshop for checking and and

repair. The setting of the idle speed should also be done

only in a professional workshop.

ATTENTION: The cutting tool rotates after the engine

has been shut off for a few seconds after that.

Put down the device only after the cutting tool has come

to a standstill and the engine has been shut off.

Replace a damaged cutting tool immediately with a new

one.