Loading ...
Loading ...
Loading ...
Oven Cleaning
To Start the delayed Self-Clean Cycle
iNSTRUCTiONS PRESS DISPLAY
Stopping or interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle due
to excessive smoke or fire in the oven:
1. Press@. @
2. Oncetheovenhascooleddownforapproximatelyl HOURandthe
"DOOR LOCKED" icon is no longer displayed,the oven door can Figure1
then be opened (Figure 1).
iMPORTANT NOTES when using the Self-Clean feature:
1. The Self-Clean feature will not operate whenever a radiant surface remains ON.
2. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
3. If a Self-Clean Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. Once power is restored, set for another Self-Clean cycle to finish.
4. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Self-Clean 12-24 hours in advance see page 13 for instructions to set the control
for the 24 hour time of day display mode.
Adjusting Oven Temperature
The temperature in the oven has been preset at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too
cool for the temperature you select, you can adjust the actual oven temperature to be more
or less than what is displayed. Before adjusting, test a recipe by using a temperature setting
that is higher or lower than the recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
INSTRUCTIONS PRESS
To adjust the oven temperature higher
1. Press Bakefor 6 seconds. 0° will appear in the display (Figure 2). Bake
2. TO increase the temperature use the number pads to enter the
desired change. (Example 30°F) _ @ (Figure 3). The (_) @
temperature may be increased as much as 35°F (19°C).
3. Press _--_ to accept the temperature change and the display will _ or
return to the time of day (Figure 4). Press _ to reject the change
if necessary.
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Figure 2
Figure 3
To adjust the oven temperature lower
1. Press B.kefor 6 seconds. 0° will appear in the display (Figure 2). B.ke
2. To decrease the temperature use the number pads to enter the
desired change. (Example-30°F) _ @ and then press c[_,F-"l (_ @
(Figure 5). The temperature may be decreased as much as 35°F F_ox
Clean
(19oc). _-J-
3. Press (_ to accept the temperature change and the display will
or
return to the time of day (Figure 4). Press _')to reject the change _")
v
if necessary.
32
Figure 4
Figure 5
Loading ...
Loading ...
Loading ...