Kenmore 79036699503 gas range

User Manual - Page 31

For 79036699503.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Oven Cleaning
Self=Clean Cycle Time Length
The FLEX CLEAN c_, pad is used to start a Self-Cleaning cycle. When used with the DELAY START pad, a
delayed Self-Cleaning cycle may also be programmed. The FLEX CLEAN feature allows for any Self-Cleaning cycle time
from 2 (2:00) to 4 hours (4:00) to be selected. You may also choose the clean time in 1 minute increments (for example 2
hours and 50 minutes) by pressing the number keypads @ (_) @.
During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave
small children unattended near the appliance.
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when
opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERY HOT.
INSTRUCTIONS PRESS DISPLAY
To start an immediate Self-Cleaning cycle or to set a delay start
time of 9:00 o'clock (example: default 3 hour Self=Clean cycle)
1. Be sure the clock is set with the correct time of day, the oven is
empty and the oven door is closed.
2, Flex
Press tie,.. "CLEAN" will flash, "3:00" (hours) and the Cooktop _,
Flex
locked icon will show in the display (See Figure 1 ). 2-4 hours of cte,,
Self-Cleaning time may be chosen by pressing any amount of time
from@@@ (2 hours)through@@@ (4hours) in one
2:00 to 4:00 using
minute increments. You may also skip the time entry and accept number pads
the default cleaning time of 3 hours by pressing the Start key pad
(See Step 3).
3. Press _s_.The "DOOR LOCKED" icon will flash; "CLEAN",
Cooktop Lockout icon and the letters "CLn" will remain on in the
display (Figure 2). "4L%_
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will quit flashing and remain on.
Figure 3
NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately skip the remaining
steps and continue with "When the Self-Clean cycle is done" on the following page.
ill,i;
Figure 1
Figure 2
@
6 ®@@
7. _ Figure 4
Press _ (See Figure 4). Enter the desired Self-Clean starting
time using the number pads @ @ @ (See Figure 5).
Press _. "CLn" icon will turn off; "DELAY", "DOOR
LOCKED", "CLEAN" and Cooktop locked icons will remain on.
Based on the time amount you selected in step 2, the control
will calculate forward from the set start time to determine when
the Self-Cleaning cycle should end. The Self-Cleaning cycle will
turn on automatically at the set time. At that time the icon
"DELAY" will go out; the oven icon will come on, the start
time, Cooktop locked icon, "CLEAN" and "CLn" will remain in
the display (See Figure 6).
When the Self=Clean cycle is done:
1. The time of day, "DOOR LOCKED" and "CLEAN" icon will
remain in the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened.
31
Figure 5
Figure 6
Loading ...
Loading ...
Loading ...