Loading ...
Loading ...
Loading ...
EN
30
Operation
www.bora.com
Lowering the temperature
XX
Tap the required cooking zone
XX
Swipe downwards to the required temperature
or
XX
tap until the required temperature is reached
or
XX
tap a lower position on the slider
or
XX
long press on (power level is decreased in threes:
... 6, 3, 0)
5.5.3 Switching off the cooking zone
XX
Tap the required cooking zone.
XX
Swipe right down to the bottom until
0
appears in the cooking
zone display.
or
XX
tap until
0
appears in the cooking zone display.
XO
The residual heat indicator
H
will then appear.
Switching off a cooking zone quickly (Quick Off)
XX
Long press on the cooking zone
XO
A longer acoustic signal provides confirmation.
XO
The residual heat indicator
H
appears in the cooking zone
display if necessary. If there is no residual heat,
0
is immediately displayed.
5.5.4 Automatic heat up function
i
The system automatically determines the heating time
depending on the power level set.
Activating the automatic heat up function
XX
Tap the required cooking zone
XX
Setting the power level (= continuous cooking level)
XX
Tap the heat-up button
XO
The automatic heat up function is activated.
XO
The automatic heat up function symbol is shown next to
the cooking zone.
i
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat
up function remains active. The heating time is adjusted
accordingly.
i
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat
up function is deactivated.
Deactivating the automatic heat up function early
XX
Tap the required cooking zone
XX
Long press on the heat-up button
XO
The automatic heat up function is deactivated.
XO
The cooking zone changes back to the previously set power
level.
Time lapsed
XO
When the heat up time has lapsed, the previously set
continuous cooking level will be activated.
XO
The heat-up symbol will no longer be displayed.
Power-level adjustment on cooktops CKFI, CKI,
CKIW, CKCH, CKCB and CKG
Increasing the power level
XX
Tap the required cooking zone
XX
Swipe upwards to the required power level
or
XX
tap until the required power level is reached
or
XX
tap a higher position on the slider
or
XX
long press on (power level is increased in threes: 0, 3, 6...)
Reducing the power level
XX
Tap the required cooking zone
XX
Swipe downwards to the required power level
or
XX
tap until the required power level is reached
or
XX
tap a lower position on the slider
or
XX
long press on (power level is decreased in threes:
... 6, 3, 0)
i
If after setting a power level on induction cooktops CKFI,
CKI and CKIW no suitable cookware is detected (pan size
recognition) within 9 minutes, the corresponding cooking
zone will be automatically switched off.
Power-level adjustment on the Tepan stainless steel
grill CKT
i
The Tepan stainless steel grill power levels are shown in
the corresponding cooking zone display as a 7-segment
font (
1
-
9
,
ßp
).
When a cooking zone is selected the temperature is
shown in °C in the multi-function display above the slider
(temperature indicator).
i
During the initial heating phase the actual temperature
is shown in the multi-function display until the target
temperature is reached in the selected cooking zone.
Increasing the temperature
XX
Tap the required cooking zone
XX
Swipe upwards to the required target temperature
or
XX
tap until the required target temperature is reached
or
XX
tap a higher position on the slider
or
XX
long press on (power level is increased in threes: 0, 3, 6...)
i
During the heating phase the red hot button flashes,
even if the operating panel display changes to the
standard display after 3.5 seconds. When the target
temperature is reached, it stops flashing.
Loading ...
Loading ...
Loading ...