Loading ...
Loading ...
Loading ...
EN
25
Operation
www.bora.com
5 Operation
5.1.2 Special operating instructions for gas
glass ceramic cooktop CKG
i
Minimum requirement for operating gas cooktop CKG:
system software 03.00 (or higher)
i
Clean the cooking zone before using the cooktop for the
first time (see the Cleaning chapter).
i
When operating the cooktop for the first time or after
a prolonged period without use or when the liquid gas
bottles have been changed, it is possible that the burner
may not ignite. This may be due to air in the gas pipe
or the electronic gas regulator may need recalibrating.
Follow the initial operation instructions (see Initial
operation chapter).
i
Due to the use of enamelled cast iron parts, slight colour
variations and irregularities are common. Furthermore,
flash rust may appear at the support points, which can
be easily removed with a damp cloth. These spots are
normal and are not considered an impairment.
i
As a result of use, some of the components of the gas
cooktop can become discoloured. This discolouration is
normal and does not have a negative effect on the gas
flame or the functioning of the cooktop.
i
When using the gas burner, you may hear gas escaping
from it. The burner flame turns orange as a result of
prolonged operation and/or impurities on the burner and
in the ambient air (dust). These properties are normal
and can occur independently of one another.
i
In the event of smoke or fire while operating the gas
cooktop, turn off the gas supply and switch off the
appliance at the wall socket.
i
If you smell gas or have problems with the gas
installation, switch off the gas supply. Open the window
and ensure good ventilation.
Operating instructions:
The use of a gas cooktop results in the formation of heat and
moisture in the area where it is installed. Intensive use of the
appliance for a long time may require the use of additional
ventilation, e.g. opening a window or more effective ventilation,
e.g. operation of the mechanical ventilation device at a higher
power level.
XX
Ensure sufficient ventilation.
XX
Keep natural ventilation openings open.
XX
Use a mechanical ventilation device if possible.
XX
Observe all safety and warning information during operation
(see Safety chapter).
i
The cooktops on the BORA Classic 2.0 system can only
be operated in conjunction with cooktop extractor
CKA2/CKA2AB.
i
The cooktop extractor must only be operated when the
grease filter components are installed.
5.1 General and specific operating
instructions
The cooktop extractor and cooktops are operated via a central
operating panel. The operating panel is fitted with electronic
sensor buttons and display panels. The sensor buttons respond
to finger contact (see Appliance description chapter).
You operate the appliance by tapping the corresponding sensor
button with your finger (touch control) or by a swipe of your
finger (slider operation).
i
Not all symbols are displayed on all appliances. Functions
and indicators are authorised corresponding to the
installed appliances.
5.1.1 Special operating instructions for the
Tepan stainless steel grill CKT
Initial operation:
XX
Heat the griddle to 220 °C for approx. 25 minutes before
using it for the first time (= power level 8 for both grilling
zones).
i
Bothersome odours may be emitted during this process.
Operating instructions:
i
Clean the grill surface before using the appliance for the
first time (see Cleaning chapter).
i
Preheat the grilling zone for 5 minutes before it is used
each time.
i
During heating or cooling the griddle may make some
noise. This is a normal occurrence.
i
A fan is built in to the Tepan stainless steel grill for
cooling, guaranteeing a long service life for the electronic
components and rapid cooling of the grill surface.
Different measures have been taken to keep noise to a
minimum, but it cannot be completely avoided.
i
During use, the griddle may show signs of curvature.
i
During grilling or heating on a high power level, the
griddle may adopt a light brown colour.
Loading ...
Loading ...
Loading ...