Loading ...
Loading ...
Loading ...
Auto re-ignition
Auto Rektnition is for your conver_ience and safety The auto re i(_nition fi,ature causes the
ktniters to spark automatically if a flame blows out or if the flame is severeEydistorted by a draft
or a cooktop ventilatior_ system
Constant sparking
The if_nitersmust be kept dean and dry to
work correctly Dirty or wet igr_iters could
cause constant sparking, even if a flame
is present (C_eetrouble shooting guide)
Igniters can be ke
with a small brush
If the burner has inconsistent flame or does not light
o If the _as does not if_nite within four seconds, turn the knob to Off Allow at least two minutes
for the gas to disperse before trying again
o Check that the power to the product is switched on
o Check that the burner parts are assembled correctly as below:
Correct Assembly }ncorlect Assembly
Power failure
In the event of a power failure, turn all burner cot trol knobs to Off The burners can be lit by
holdir_g a Ii(_hted match close to the side of the burner and tuminc_ the control knob to Hi Wait
until the flame is burning all the way around the burner cap before adjusting
Loading ...
Loading ...
Loading ...