Loading ...
Loading ...
Loading ...
T:o e shoot ng
My cooktop does not Check it is plugged in and there is power to the wall socket
The gas igniters may be dirty These can be easily cleaned
with a toothbrush and rubbing alcohol
The burner parts may not be located properly Check the
assembly and make sure the burner cap is sitting flat
Check the gas supply valve is turned on and the supply to
the house is working Gas should be heard when you turn a
burner ors
My burner flames are
The burner parts may not be located properly Check the
assembly and make sure the burner cap is sitting flat
If you use bottled gas this may indicate you are getting near
the end of the bottJe_
Check that the burner parts are not blocked with wateh
The gas pressure may not be correct, check with your service
One of my burners has
an uneven flame
My cooktop is sparking
Check the burner parts are assembled correctly and that the
burner cap is sitting flat or the burner
Your cooktop thinks that the flame has gone out. This could
be caused by drafts disturbing the flame eg. using a down
draft.
Check that the igniter is clean and dry_
Your power supply may not be properly grounded or, in an
older house, the correct wiring polarity may not have beers
observed
The flame goes out at
_ow settings
Gas supply pressure may be low, check with service person/
installer:
[ow setting may be incorrect, check with your service person/
installer
14
Loading ...
Loading ...
Loading ...