Loading ...
Loading ...
Loading ...
Problem solving guide
64
Problem Cause and remedy
The FlexiClip run-
ners do not push
in or pull out
smoothly.
The bearings in the FlexiClip runners are not sufficiently lub-
ricated.
Lubricate the bearings with the special Miele lubricant.
Only the special Miele lubricant is designed for the high tem-
peratures in the oven compartment. Other lubricants may
resinify when heated and will gum up the FlexiClip runners.
You can obtain the special Miele lubricant from your Miele
dealer or from the Miele Customer Service Department.
There is still soil-
ing in the oven
compartment
after a pyrolytic
cleaning pro-
gramme.
The pyrolytic cleaning programme burns off soiling in the
oven and leaves it as ash.
Remove the ash using a damp microfibre cloth or with a
clean sponge and a solution of hot water and washing-up
liquid.
If there is still coarse soiling left in the oven after the pyro-
lytic cleaning programme you should start the programme
again, selecting a longer duration if necessary.
The door will not
open after the
pyrolytic cleaning
programme.
The door lock for pyrolytic cleaning has not opened.
Turn the function selector to0.
If the door lock still does not release itself call the Cus-
tomer Service Department.
The top oven in-
terior lighting
does not turn on.
The halogen lamp is faulty.
Danger of burning!
Make sure the oven heater elements are switched off.
Make sure the oven compartment has cooled down.
Disconnect the oven from the mains. Switch off at the
wall and withdraw the plug from the socket or switch off
the fuse of the electrical installation.
Turn the lamp cover a quarter turn anti-clockwise to re-
lease it and then pull it together with its seal downwards
to take it out.
Replace the halogen lamp (Osram66725AM/A, 230V,
25W, G9).
Refit the lamp cover together with its seal and turn
clockwise to secure.
Reconnect the oven to the electricity supply.
You have selected the Eco Fan heatfunction. The oven
interior lighting does not switch on in this function.
Loading ...
Loading ...
Loading ...