DVD Player
DVD-HD960
V I D O
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13) Unplug this apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
ENG-2
Precautions
TO REDUCETHE RISK OF ELECTRICSHOCK, DO NOT
REMOVETHE COVER(ORBACK).
NO USER-SERVICEABLEPARTSARE INSIDE. REFER
SERVICINGTO QUALIFIEDSERVICEPERSONNEL.
This symbolindicates"dangerous
voltage"insidethe productthat
presentsa risk of electricshock or
personalinjury.
This symbol indicates important
instructions accompanying the
product.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose
this appliance to rain or moisture.
CAUTION : DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour _viter les chocs 61ectriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and
televisions, use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiofrV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference --
Causing Equipment Regulations.
ENG-3
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• The product unit accompanying this user manual is licensed under certain intellectual property rights
of certain third parties. In particular, this product is licensed under the following US patents:
5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655,
5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080, and
under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Handling Cautions
• Beforeconnectingother componentsto this player,besure to turn themall off.
• Do not movethe playerwhile a disc is beingplayed,or the disc maybe scratchedor broken,and the player's
internalparts may be damaged.
• Do not put a flowervase filled with wateror any small metal objectson the player.
• Be careful not to put your handinto the disc tray.
• Do not place anything otherthan the disc inthe disc tray.
• Exterior interferencesuchas lightningand staticelectricitycan affect normal operationof this player.
Ifthis occurs,turn the playeroff and on again withthe POWERbutton, or disconnectand then reconnectthe
AC powercord to the AC power outlet.The player will operate normally.
• Be sure to remove the disc and turn off the playerafter use.
• Disconnectthe AC power cord fromthe AC outletwhenyou don't intendto use the player for long
periodsof time.
• Cleanthe disc by wipingin astraight linefrom the inside to the outside of the disc.
Disc Storage
Becareful notto harmthe disc becausethe data onthese discs is highlyvulnerableto the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilatedarea.
• Storevertically.
• Keep in a clean protectionjacket.
Maintenance of Cabinet
For safetyreasons,be sure to disconnectthe AC powercord fromthe AC outlet.
• Do not use benzene, thinner,or other solventsfor cleaning.
• Wipethe cabinetwith a softcloth.
ENG-4
Before you start
Accessories
Remote Batteries for Remote
Control Control (AAA Size)
(AK59-00055D) (AC43-12002H)
User's Manual
(AK68-O1038D)
Video/Audio
Cable
(AC39-42001 R)
HDMI Cable
(MF39-OO299A)
Install Batteries in the Remote control
o2;,;Yt :tt %o,
the remote control.
2¸¸¸¸¸¸ :
Insert two AAA batteries. _----.._
Make sure that the
polarities (+ andi) aie
aligned €orrectly.
cRevP_tCethe battery
If the remote control doesn't operate properly:
- Check the polarity + - of the batteries (Dry-Cell)
- Check if the batteries are drained.
- Check if remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
ENG-5
TABLEOF CONTENTS
Important Safety Instructions ............................................. 2
Precautions ........................................................... 3
Before you start ....................................................... 5
Chapter 1 : Setup
General Features ........................................... 7
Disc Type and Characteristics ................................. 8
Description ................................................ 9
Tour of the Remote Control ................................... 11
Chapter 2: Connections
Choosing a Connection ..................................... 12
Chapter 3: Basic Functions
Playing a Disc ............................................ 20
Using the Search and Skip Functions .......................... 22
Using the Display Function .................................. 23
Using the Disc and Title Menu ................................ 24
Using the Function Menu .................................... 25
Repeat Play .............................................. 26
Slow Play ................................................ 27
Chapter 4: Advanced Functions
Adjusting the Aspect Ratio (EZ View) ........................... 28
Selecting the Audio Language ................................ 30
Selecting the Subtitle Language ............................... 31
Changing the Camera Angle ................................. 32
Using the Instant Replay/Skip Function ......................... 33
Using the Bookmark Function ................................ 34
Using the Zoom Function .................................... 36
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio ............... 37
Folder Selection ........................................... 37
MP3/WMA/CD Audio Playback ................................ 38
MPEG4 Playback .......................................... 40
Picture CD Playback ........................................ 42
Chapter 5: Changing Setup Menu
Using the Setup Menu ...................................... 44
Setting Up the Language Features ............................. 45
Setting Up the Audio Options ................................. 50
Setting Up the Display Options ................................ 52
Setting Up the Parental Control ............................... 55
Chapter 6: Reference
Controlling a TV with the Remote control ........................ 58
Firmware upgrade ......................................... 59
Troubleshooting ........................................... 60
Specifications ............................................. 62
ENG-6
SETUP
General Features
Excellent Sound
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
Slow Motion
An important scene can be viewed in slow motion.
Parental Control (DVD)
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
Progressive Scan
Progressive scanning creates an improved picture
with double the scan lines of a conventional
interlaced picture.
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA files.
Instant Replay (DVD)
This function is used to replay the previous 10
seconds of a movie from the current position.
Instant Skip (DVD)
This function skips playback ahead 10 seconds.
MPEG4
This unit can play MPEG4 formats within an avi file.
HDMI (High Definition Multimedia
Interface)
HDMI reduces picture noise by allowing a pure
digital video/audio signal path from the player to
your TV.
Note
- Discs which cannot be played with this
player.
• DVD-ROM • DVD-RAM
• CD-ROM • CDV
• CDI • CVD
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back may depend on recording
conditions.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW (V mode)
- The unit may not play certain CD-R CD-RW
and DVD-R due to the d sc type or record ng
conditions.
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PROGRESSIVE SCAN OUTPUTS
(525p)
"CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER."
ENG-7
SETUP
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding Iogos:
DiscTypes(Logos)
DVD
VIDEO
VIDEO-CD
AUDIO-CD
DIGITAL AUDIO
I
Recording Types Disc Size
5 _
Audio
+
Video
3 1/2"
5 _
Audio
+
Video
3 1/2"
5"
Audio
3 1/2"
i
Max. Playing Time I Characteristics
Single-sided 240 rain.
Double-sided 480 min.
Single-sided 80 min.
Double-sided 160 min.
74 rain.
20 min.
74 min.
20 min.
- DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the
on-screen menu.
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
Disc Markings
Play Region Number
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
Dolby Digital disc
Stereo disc
Digital Audio disc
DTS disc
MP3 disc
You must only insert one DVD disc at a time'
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
Region Number
Both the DVD player and the discs are
coded by region. These regional
codes must match in order for the disc
to play. If the codes do not match, the
disc will not play.
The Region Number for this player
is described on the rear panel of the
player.
DivX Certification
DivX, DivX Certified, and
associated loges are
trademarks of DivXNetworks,
Inc and are used under
license.
ENG-8
I
SETUP
I
Description
Front Panel Controls
9 10
1 2 4 5 6 7 8
1. STANDBY/ON (0/I)
When STANDBY/ON is pressed on, the indicator goes out
and the player is turned on.
2. STANDBY Indicator
When the unit is first plugged in, the indicator lights.
3. DISC TRAY
Place the disc here.
4. OPEN/CLOSE ( A )
Press to open and close the disc tray.
5. DISPLAY
Operation indicators are displayed here.
Front Panel Display
6. VIDEO SEL.
Press to change Video output mode (Progressive ON or
Progressive OFF).
7. STOP ( • )
Stops disc play.
8. SKIP (1_) / SEARCH
Use to forward skip a scene or music.
9. SKIP (1_) / SEARCH
Use to reverse skip a scene or music.
10. PLAY/PAUSE ( H )
Begin or pause disc play.
I
3
1. Disc type indicators
2. Play / Pause
3.
Displays various messages
concerning operations such as PLAY,
STOP, LOAD ...
no DISC: No disc loaded.
OPEN: The disc tray is open.
LOAD: Player is loading disc information.
ENG-9
I
SETUP
Rear Panel
4 5
1. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide PR,PBand Y video.
- If Progressive Out is set ON in Video Output of the
Setup Menu, progressive scan mode will work.
- If Progressive Out is set OFF in Video Output of the
Setup Menu, interlaced scan mode will work.
3. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
5. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
6. NDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- If Progresive Out On Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.
- The HDMI output of this unit can be connected to a DVl jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVl input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 52 ~ 54 to get more information on how to use the setup menu.
ENG-IO
I SETUP I
Tour of the Remote Control
1
2
6
7
8
9
10
11
12
13
14
15
16
1. VIDEO SEL. Button
Selects video output formats
2. HDMI SEL. Button
HDMI Output resolution setup.
3. DVD POWER Button
Turns the power on or off.
4. NUMBER Buttons
5. BOOKMARK Button
6. SEARCH Buttos (<4 / !_)
Allow you to search forward/backward through a disc.
7. INSTANT REPLAY Button
-- 17 This function is used to replay the previous 10 seconds
-- 18 of a movie from the current position.
8 SKIP Buttons (1<4/I_1_1)
-- 19 Use to skip the title, chapter or track.
20 9. STOP Button ( • )
10. VOL (+, -) Buttons
Control volume.
11. MENU Button
Brings up the DVD player's menu.
12. ENTER/A/V,<I/I_ Buttons
This button functions as a toggle switch.
21 13. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
-- 22 14. DiSC MENU Button
Brings up the Disc menu.
23 15. SUBTITLE Button
16. AUDIO Button
Use this button to access various audio functions on a disc.
24
17. REPEAT A-B Button
Allows you to repeat play A-B disc
-- 25 18. REPEAT Button
26 Allows you to repeat play a title, chapter, track, or disc.
19. TV POWER Button
Turns the TV's power on or off.
20. OPEN/CLOSE ( & ) Button
Toopen and close the disc tray.
21. STEP Button
-- 27 Advances play one frame at a time.
-- 28 22. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
29 23. PLAY/PAUSE Button ( I_11)
30 Begin/Pause disc play.
24. OH (.%, v) Buttons
Channel selection.
25. TV/VlDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
26. RETURN Button
Returns to a previous menu.
27. INFO Button
Displays the current disc mode.
28. CANCEL Button
Use to remove menus or status displays from the screen.
29. ZOOM Button
Enlarges the DVD Picture
30. ANGLE Button
Use to access various camera angles on a DVD.
ENG-11
CONNECTIONS
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other components before you connect or disconnect any
cables.
- Refer to the user's manual of the additional components (such as a TV) you are connecting for
more information on those particular components.
Connection to a TV (Video)
1
Usingvideo/audiocables,connectthe VIDEO(yellow).AUDIO
(redand white) OUTterminalson the rearof the DVDplayerto
the VIDEO(yellow)/AUDlO(red andwhite) INterminalsof
yourTV
2
Turnon theDVDplayerandTV,
®o®o&
[]
Press the nput selector on your TV remote control until the
Video signal from the DVD ulayerappears on the TV screen.
4
Youcanalso useme VIDEOSEL.buttonto changetheVideo
Outputmode.(Seepage12)
AUDIO IN VIDEO IN
Note
- Noise may be generated if the audio cable placed too close to the power Cablel
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD
player.
- If you press the VIDEO SEE button when DVD Player is in stop mode or no disc is inserted, the Video
Output mode changes in the following sequence: (Progressive : ON _ Progressive : OFF).
ENG-12
I
CONNECTIONS
I
Connection to a TV (S-Video)
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y)
and color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-Video cable inot mcluaea), connect the S-VIDEO
OUT terminal on the rear of the DVD player to me
S-VIDEO IN terminal of your TV
Using Lheaudio cables, connect the AUDIO (red and white]
OUT terminals on the rear of the DVD player to the AUDIO (red
and white] IN terminals of your TV.
Turn on the DVD player and TV.
3
Press [ne nDutselector on your TV remote control until the S-
Video signal from the DVD player appears on your TV screen.
4
Set the Video Output to Progessive Out Off in the Display
Setup menu. (See pages 52 to 54!
You can use the VIDEO SEL. button to change the Video
OutPut mode. (See uage 12'
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- Please do not connect S-Video and Component Video (Y, Pb, Pr) output simultaneously, as they may
interfere and degrade both video output quality.
ENG-13
I
CONNECTIONS
I
Connection to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates
the picture element into black and white(Y), blue(PB), red(PR)signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
1
Using comuonent video cables (not includec, connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
#ayer to the COMPONENT IIi terminals of your TV.
2
Using me audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remora control until the
Component signal from the DVD player appears on the TV
screer
4
Set the Video Output to Progressive Out Off in the Display
Setuo menu. (See pages 52 to 54/
You can use me VIDEO SEL. button to change the Video
Output mode. (See cage 12)
Audio C_b_ _
COMPONENT IN
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)
- The component terminal of your TV may be marked "R-Y, B-Y, Y" or "Or, Cb, Y" instead of "PR,PB,Y"
depending on the manufacturer. The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
ENG-14
I
CONNECTIONS
I
Connection to a TV (Progressive)
1
Using component video cables not includedL connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV
2
Using [he audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals ol your TV.
Turn on the DVD player and TV.
3
Press me mout selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video OutPut to Progressive Out ON in the Display
Setup menu. (See pages 52 to 54_
You can use the VIDEO SEL. button to change the Video
OutPut mode. (See page 121
To see the progressive video output,
. Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive
Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
ENG-15
CONNECTIONS
Connecting to a TV with DVI Jack
1 ...................................................................................................................................................................................................................................................................................................................................................
Usingthe HDMI-DVIcable (notincluded),connecttheHDMI
OUT terminalon therearof the DVDplayerto the DVl IN
terminalof yourTV,
Using the audio cables, connect the AUDIO (red and white)
OUT terminalson the rear of the DVD player to the AUDIO
(red and white) IN terminal s of YOUrTV,
Turn on the DVD player and TV,
RED
2,
j
A
®oJ
Press the input selector On your TV remote control until the DVI
Signal from the DVD player appears on Your TV Screen.
{
Connecting to a TV with HDMI Jack
1
Usingthe HDMI-HDMIcableconnecttheHDMIOUTtermnal
on the rear of the DVDpayer to the HDMIINterminalof yeur
TV.
2
Presstheinputselectoron yourTVremotecontroluntilthe
HDM signalfromthe DVDelayeraeeearson yourTV screen.
HDMI VIDEO Specifications
When you press the HDMI SEL. button, 480p, 720p, 1080i and 1080p are selected in order.
The first press of the HDMI SEL. button, brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user's manual of your TV.
- If HDMI or HDMI-DVI cable is plugged into TV, the DVD player's output is set to HDMI/DVI automatically
about 10 seconds later.
- If you set the HDMI output resolution to 720p, 1080i or 1080p, HDMI output provides better picture quality.
- If your TV cannot support current HDMI resolution setting, HDMI resolution is setted 480p automatically.
ENG-16
l CONNECTIONS l
• HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital transmission of video and audio data with iust a single connector
Using -tDMI. the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV
having an HDMI input jack.
• HDMI connection description
DMI connector - Both uncompressed video data and digital audio data LPCM or Bit Stream data).
- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-bandwidth Digital content protection p.snow noise appears on the
screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However. when playing a DVD. the data transmitted to a
TV is digital. Therefore either a digital-to-analog converter in the DVD player) or an analog-to-digital
converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and
signal loss. HDMI technology is superior because it requires no D!A. A D conversion and is a pure digital
signal from the player to your TV.
• What is the HDCP?
HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via
DVl from being copied. It provides a secure digital link between a video source PC. DVD. etc) and a
display device (TV, projector, etcL Content is encrypted at the source device to prevent unauthorized
copies from being made
ENG-17
I
CONNECTIONS
I
Connection to an Audio System (2 Channel Amplifier)
1
Using me aualo cables, connectthe AUDIO (red and whitei
OUT terminals on the rear of the DVD pJayerto the AUDIO (red
and white) IN terminals of the Amolifier.
2
Using the video signal cable(sl connect the VIDEO, S-VIDEO.
COMPONENT or HDMI OUT terminals on me rear of the DVD
player to the VIDEO, S-VIDEO. COMPONEN'I" or NDMI-DVl IN
mrm nal of your TV as descnoea on pages 12 to 16.
3
Turn on the DVD player. TV. and Amplifier.
4
Press the input select button of the Amplifier to select external
input in order to hear sound from the DVD player.
Refer to your Amplifier's user manual to set the Amplifier's
audio Jnou[.
Note
- Please turn the volume down when you turn onthe Amplifier, Sudden loud sound may cause
damage to the speakers and your ears.
Please set the audio in the menu screen according to the Amplifier.(See pages 50 to 51)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
ENG-18
I
CONNECTIONS
I
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
f using an outical cable _'notincluded), connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear of the DVD player
to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.
f using a coaxial cable mot mcluded_,connect me DIGITAL
AUDIO OUT (COAXIAL) mrmmal on the rear of the DVD player
io me DIGITAL AUDIO IN (COAXIAL) terminal of the Amulifier.
2
Usinc the video signal cable(s), connec_ me VIDEO, S-VIDEO.
COMPONENT or HDMI OUT terminals on the rear of the DVD
player to the VIDEO, S-VIDEO. COMPONENT or HDMI/DVl IN
terminals of your TV as descnuea on pages 12 to 16.
3
Turn on the DVD player. TV. and Amplifier.
l\\
4
3ress the input selecl button of the Amulifier to select external
input in order to hear sound from the DVD player.
:{efer to your Amplifier's user manual to set the Amulifier's
audio input.
Note
- When you connect the OrB player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
- Please turn the volume down when you turn on the Amplifien Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51 )
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
ENG-19
BASIC FUNCTIONS
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on the TV's remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and set
it to the correct Audio Input,
After plugging in the player, the first time you press the DVD POWER button, this
screen comes up; If YOUWant to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for the first time_)
If the language for the startup screen is not set, the settings may change whenever you
turn the power On Or off, Therefore, make sure that you select the language you want to
Use,
Once you select a menu language, you can change it by pressing the _ button on the
front panel of the unit for more than 5 seconds with no disc in the uniL Then the !
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
Press the OPEN/CLOSE
(_A)button.
The STANDBY notcator
ight goes out and the tray
opens.
2
Place a disc gently into the
tray wtrh me disc's label
facing up.
3
_,4 RESUME function
When you stop disc Play, the player remembers
where you SIODDe(3 SO wnen you press
PLAY/PAUSE • button again, it will pick up
where you left off.
ENG-20
I
BASIC FUNCTIONS
I
4
StoppingPlay
PresstheSTOP(I) button
duringplay.
Note
If the player is left in the stop mode for more than
one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE
(_,,) button to resume normal play.
If the player is left in the stop mode for more than
30 minutes, the power will automatically turn off.
(Automatic Power-Off Function)
5
RemovingDisc
PresstheOPEN/CLOSE
( A) button.
6
PausingPlay
PressthePLAY/PAUSE
(_tt) or STEPbutter"on the
remotecontrolduringplay.
Step Motion Play (Except
CD)
Press me STEP button or
the remote control dunng
eJay.
Screen stops, no sound.
To resume, press the PLAY/PAUSE (_-,) button
once again.
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
Each time the button is pressed, a new frame
will appear.
No sound is heard during STEP mode.
Press the PLAY/PAUSE (_,,) button to resume
normal play.
You can only perform step motion play in the
forward direction.
8
SlowMotionPlay
Pressthe SEARCH(_/_)
eu_tontochoosethepray
speedbetween1/8,1/4and
12 of normalduringPAUSE
or STEPmode
-.q No sound is heard during slow mode.
Press the PLAY/PAUSE (_,,) button to resume
normal play.
Note
This ( ® ) icon indicates an invalid button press.
ENG-21
BASIC FUNCTIONS
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
During play, pressthe
SEARCH (_1 or _-) button
on [he remote control for
more than 1 second.
-.9 Ifyou want to searchat afaster speed on the
DVD, VCDor CD, press andhold the button.
4X, 64X, 128X
Iv? ox
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is hearing during search mode
(Except CD).
Skipping Tracks
- When playing a DVD, if you press the SKIP (_)
button, it moves to the next chapter. If you press
the SKIP (i._) button, it moves to the beginning
of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a VCD 2.0 in Menu Off mode, or a
VCD 1.1 or a CD, if you press the SKIP (_l)
button, it moves to the next track. If you press
the SKIP (_) button, it moves to the beginning
of the track. One more press makes it move to
the beginning of the previous track.
- If a track exceeds 15 minutes when playing a
VCD and you press the _ button, it moves
forward 5 minutes. If you press the _*qbutton,
it moves backward 5 minutes.
Note
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
ENG-22
I
BASIC FUNCTIONS
I
Using the Display Function
When Playing a DVD/VCD/MPEG4
1
Duringplay,pressme
INFObuttonon me remora
oon[rol.
_,I You can select Info in the function menu by
pressing the MENU button.
Press me &/¥ buttons to
semci the desired item.
DVD
VCD
When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
_PEG4
3
Pressthe4/1_ buttonsto
makethe desiredsetupanc
thenprsssthe ENTER
DUIIOR.
-.9 You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from a desired time.
4
ENG-23
BASIC FUNCTIONS
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an VCD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
(DivX)
File Size has a relationship with resolution of a title.
The larger file size is, the higher resolution is displayed.
If the file resolution is small, it scales up automatically. So you can see the larger screen.
Using the Disc and Title Menu
Using the Disc Menu
1
Duringtheplaybackof a
DVDdisc.oresstheMENU
buttononthe remote
COFIIroL
2
Pressthe ,tl,/T 3u[tonsto
select DiscMenu.then
pressthe 1_or ENTER
button.
Note
- Depending on a disc, the Disc Menu may not
work.
- You can also use select the Disc Menu, using the
DISC MENU button on the remote control.
- In VCD 2.0 the DISC MENU button is used to
select Menu On or Menu Off mode.
ENG-24
I
BASIC FUNCTIONS
I
Using the Title Menu
Press the &/¥ buttons to
select Title Menu, then
press the I_ or ENTER
button.
Using the Function Menu
Using the Function Menu (DVD/VCD)
Press the MENU button
dunng playback.
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
2
Press the &/¥ bu[tens to
select Function. men Dress
me I_ or ENTER button.
- Info See oages23 to 24)
- Zoom (See page 36t
- BooKmark
lSee pages 34 to 35/
- Repeat (See pages 26)
- EZ View
(See uages28 to 29/
- Angle (See pages 32)
3
Press the A/_ su[tons to
select one of the six
functions. Then Dressthe
I_ or ENTER button re
access the function.
-,4 You can also directly select these functions
using their respective buttons on the remote
control.
- Info - Repeat
- Zoom - EZ View
- Bookmark - Angle
ENG-25
BASIC FUNCTIONS
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD/VCD
Press the REPEAT button
on tne remo_econtrol.
Repeat screen aDDears.
2
Press me 4/1_ buttons EO
select Chapter, Title or A-B.
men press the ENTER
button.
DVD
VCD
-,q DVD repeats play by chapter or title and VCD
repeat play by disc or track.
Chapter (O): repeats the chapter that is
playing.
Title (_): repeats the title that is playing.
Disc (_): repeats the disc that is playing.
Track (_): repeats the track that is playing.
A-B: repeats a segment of the disc that you
select.
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the _/P. button to select A-B button.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
To return to normal play, press the CANCEL button.
Note
A-B REPEAT allows you to set point (B) directly after point (A) has been set.
3 DVD
To return to normal play!
press REPEAT button
again, then press the 41Jl_ I I
buttons to select Off and _ Note
p[esiENTERbutt°nl- notDependingwork,on a disc, the Repeatfunction may
- WhenVCD 2.0 is in MenuOff mode only,this
function works.Select Menu Off by pressingthe
DISC MENUbutton.
ENG-26
I
BASIC FUNCTIONS
I
Slow Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD
1
During play, press the
PLAY/PAUSE (1_,} button.
2
Press the SEARCH (_ _)
outton to choose the play
speed between 1/8, 1/4 and
1/2 of normal during PAUSE
or STEP mode.
ENG-27
ADVANCEDFUNCTIONS
Adjusting the Aspect Ratio (EZ View)
To play back using aspect ratio (DVD)
Press the EZ VIEW
- The screen size
Changes when the
button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the DisPlay
Setup menu.
To ensure correct
operation of the EZ
VIEW button, you should
set the correct aspect
ratio in the Display
Setup rnenu,
(See pages 52 to 54).
-,4 To make the aspect ratio bar disappear,
press the CANCEL button.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
- WIDE SCREEN
Displays the content of the DVD title in t 6:9 aseect ratio
For 4:3 aspect ratio discs
- Normal Wide
Displays the content of the DVD title in 16:9 asuect ratio.
The #_cturewill look horizontal y stretched.
- SCREEN FIT
The top and Dotlofr portions of the screen are cut off. When
playm9 a 2.35:1 aspect ratio disc. the black bars at the top
and bottom of the screen wl disappear. The picture will
look vertically stretched. '_Dependingon atype of disc. me
black bars may not disappear completely.)
- ZOOM FIT
The top. bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched
- ZOOM FIT
The top. bottom, left and right portions of the screen are cu_
off and the centra porilon of the screen is enlarged.
- Vertical Fil
When a 4:3 DVD is viewea on a 16:9 TV. black bars wi
appear at the left and right of the screen in order to oreven_
the picture from looking horizontally stretched.
ENG-28
ADVANCEDFUNCTIONS
If you are using a 4:3 TV
For 16:9 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9 asuect ratio.
The black bars will aDuear at the top and bottom of the
screen
- 4:3 Pan&Scan
The left ane ngnt portionsof the screen are cut off and the
central portion of the 16:9 screen is disulayee.
- SCREEN FIT
The top and bottom portions of the screen are cut off and a
full screen appears
The elcture will look vertica y stretcneo.
For 4:3 aspect ratio discs
- Normal Screen
Displays the content of the DVD title in4:3 asuect rano.
- SCREEN FIT
The top one eottom portions of the screen are cut off anc
me full screen aeoears.
The picture will look vertically stretcneo.
- ZOOM FIT
The top, bottom, left and rignt portionsof the screen are cut
off and the central uortlonof the screen is enlarged.
- ZOOM FIT
The top. bottom, left and right of the screen are cut off and
the central portion of the screen Jsenlarged.
Note
This function may behave differently depending on the type of disc.
ENG-29
ADVANCEDFUNCTIONS
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button,
Using the AUDIO button (DVD/VCD/MPEG4)
Press the AUDIO ou[ton.
The Audio changes when
the button is pressed
repeatedly.
- The audio languages
are represented by
abbreviations.
When playing a VCD.
you can select among
Stereo. Right or Left.
DVD
VCD
MPEG4
Press AUDIO button at
remocon repeatedly ie
select the aeslred Audio on
a MPEG4 then oress the
ENTER button.
Note
- This function depends on audio languages are
I ADVDdisccancontainupto8audioencodedonthodiscand,anguages. maynotwork.
Toha_ethesameaod,olanguagecomeup
whenever you play a DVD; Refer to "Using the
Audio Language" on page 47.
ENG-30
I
ADVANCED FUNCTIONS
I
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
Press the SUBTITLE
button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represemee Dy
abbrevial ens. DVD
External subt Eleoptlor
will appear, aepends the
DivX Disc.
MPEG4
Press SUBTITLE button at
remocon repeatedly to select
me desired subtitle language
on a MPEG4 tnen Dressthe
ENTER button.
_PEG4
To removethe SUBTITLE
icon, presstheCANCEL
or RETURNbutton.
Note
Depending on the DVD you may have to select
the desired subtitle in the DVDs Disc Menu.
Press the DISC MENU button.
- This function depends on what subtitles are
vo_ _H encodedDVDs,on the disc and may not work on all
i
- Alanguages.DVDdisc can contain up to 32 subtitle
- wheneverT°have theyouSameplaySUbtitleaDVD;language come up
Refer to "Using the Subtitle Language" on page
48.
ENG-31
I ADVANCED FUNCTIONS I
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE mark appears on the screen.
During play, press the
MENU button on the
remote control.
2
Press the A/T Bu[tons to
select Function then
press the I=,-or ENTER
buIton.
3
Press the Jl,/T buttons to
se_ec[Angle, then press
the I_ or ENTER button.
4
Press the _1t1_ buuons or
you can use the number
ou[tons on the 'emote
control to select the
aes tea angle
Note
- If the disc has only one angle, this feature won't
work. Currently, very few discs have this feature.
- Depending on the disc, these functions may not
work.
ENG-32
I
ADVANCED FUNCTIONS
I
Using the Instant Replay/Skip Function
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using this function.
Pres_ the INSTANT
REPLAY button.
- Tne curren_ scene
moves backward about
13 seconds, and plays
oack.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10 seconds ahead of the current scene.
Press the INSTANT SKIP _Z;)
8QOKMARK
button.
i Playback wi!l skip ahead
10 secends,
Note
Depending on the disc, these functions may not
work.
ENG-33
I ADVANCED FUNCTIONS I
Using the Bookmark Function
This feature lets you bookmark sections of a DVD, so you can quickly find them at a later time.
Using the Bookmark Function (DVD/VCD)
1 ....
During play, press the
MENU button 0n the` _r'J_ i
Press the A!T buttons to
select Function, then
press the I_ or ENTER
buttoni
3
Press the A/T bu[tons to
select Bookmark. men
press the I_ or ENTER
button.
4
When you reacn the
scene you want to marK.
press the ENTER button.
Up io three scenes may
be marked at a t_me.
Note
- When VCD 2.0 is in Menu Off mode only, this
function works. Select Menu Off by pressing the
DISC MENU button.
- Depending on a disc, the Bookmark function may
not work.
ENG-34
I
ADVANCED FUNCTIONS
I
Recalling a Marked Scene
1
BDUoriogplAYl_Prbusl_ot_e n
the rem0te contro !.
W
®
Press the _1/1_ buttons to
select a marked Scene.
Press the PLAY/PAUSE
( IIHI ) button to skip to
the marked scene.
Clearing a Bookmark
1
During play, press the
BOOKMARK button on
the remote contro
2
Press the -_1/1_buttons to
select the bookmark
number you wan[ toaelete.
3
Press me CANCEL bu_ton
to delete a bookmark
number.
%. ,
ENG-35
ADVANCEDFUNCTIONS
Using the Zoom Function
Using the Zoom Function (DVD/VCD)
1
During play, press the
MENU button on the
remote control.
2
Press the ,i, iT buttons to
select Function. then
press the _ or ENTER
button
3
Press the A/T buttons to
select Zoom. then press
LheI_ or ENTER
button,
4
Press the J,!V or _l/Ip-
outtons to select the Dan
of the screen you want lo
zoom In on.
Press the ENTER button,
During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
During VCD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
ENG-36
ADVANCED FUNCTIONS
I
Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio
CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can
be organized into folders as shown below. They are similar to how you use your computer to put
files into different folders.
Open the disc tray.
Place the disc on thetray.
Close the tray.
The tray closes and this
screen oJsptays.
[]
@
: Name of currently playing file.
: Current Playback Time.
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
[]: MP3 file icon.
_: WMA file icon.
_: JPEG file icon.
I_ :AVI file icon.
: CDAudio file icon.
_ : Folder icon.
_@_,_: Current Folder icon
Folder Selection
The folder can be selected both in Stop or Play mode,
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the A/V buttons to select ".." and
press ENTER to go to the parent folder.
- To select the Peer Folder
Press the A/_' buttons to select the desired folder
then press ENTER.
- To select the Sub-Folder
Press the A/_' buttons to select the desired folder
then press ENTER.
WMA
_ JPEG
MP3 _ Parent Folder i
MUSIC _Ctlrrent FoWer
_SONG FiLE 3
_N IvlPEG4 FILES
ENG-37
I ADVANCED FUNCTIONS I
MP3/WMA/CD Audio Playback
Open the disc tray.
Place the disc on the tray.
Close the tray.
-,9 Only one kind of file is played back
when a disc or a folder contains both
MP3 and WMA files.
2
Press the A!T bu[tons to
select a song file.
Press ENTER to begin
playback of the song file.
Repeat/Random playback
Track: Repeats the current song file.
- Folder: Repeats the song iiles which have the same extension
in the Currentfolder,
-Random: Song files which have the same extension will be
plaYed in random order.
To resume normal play, press the CANCEL button.
ENG-38
ADVANCED FUNCTIONS
CD-R MP3/WMA file
- Use a decompression transfer rate of at least 64Kbps
When you record MP3 or WMA files on CD-R for playback when recording WMA files.
in this unit, please refer to the following. Sound quality with WMA files basically depends on the rate
- Your MP3 or WMA files should be ISO 9660 or JOLIET of compression!decompression you choose.
Getting CD audio sound reouires an analog/digital samp ing
format, rate. that is conversion to WMA format, of at least 64Kbps
ISO 9660 format and Joliet MP3 or WMA files are and ue to "92Kbes
compatible with M crosoft's DOS and Windows. and with Conversely, files with decomuresslon rates below 64Kbps
Aeule'_ Mac. This format is the most widely used or over 192Kbps will not be played property.
- When naming your MP3 orWMA files, do not exceed 8
characters, and enter ".mp3, .wma" as the file
extension.
General name format : Title.me& or Title.wma. When
composing your title, make sure that you use 8 characters
or less. have no soaces in the name. and avoid the use of
seecial characters including: [ ....... _-,.
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
Sound quality with _P3 files basically depenos on the rate
of compresslon/oecomeressJon you choose. Getting CD
audio sound requires an analog/digital sampling rate that is
conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However. onoosmg higher rates, like 192
Kbos or more. only rarely give better sound quality.
Conversely, files with decomuression rates below 128 Kbps
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected to
prevent illegal copying. These files are of the following
types: Windows Media r" (registered trade mark of Microsoft
nct and SDMITM (registered trade mark of The SDMI
Foundation,. You cannot copy such files
- Important:
"[Beaeove recommendations cannot Betaken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain tecnnoJog_esand methods for MP3 file recording on
CD-Rs 3revent optimal playoacK of these files on your DVD
player (degraded sound eual [y and in some cases, nabili[y
of the #ayer to read the files J.
- This unit can play a maximum of 500 files and 500 folders
per disc.
will not be played properly.
ENG-39
ADVANCEDFUNCTIONS I
MPEG4 Playback
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the
".avi" extensions can be played.
1
Open the disc tray.
Place the dtsc on the tray.
Close the tray.
2
Press the A/_' or 4/1_
uu[tonsto select an avi file
(DivX/XviD/. then Dressthe
ENTER button.
Repeat Playback
- Title : repeats the titl e that is playing,
ENG-40
ADVANCED FUNCTIONS
MPEG4 Function Description
Function Description Reference page
Skip During play, press the _ or
(I,_ or I,_) _ button, it moves forward
or backward 5 minutes.
Duringplay,presstheSEARCH
(_ or I_1_,,)buttonandpress
Search againto searchat afaster
(_,_1or I,,_.) speed.Allows you to search
at a faster speed in anAVI
file. (2X, 4X, 8X)
Allows you to search at a
Slow Motion slower speed in anAVl file. P21
Play 1/8X, 1/4X, 1/2X)
Each time the STEP button
Step Motion is pressed, a new frame will P 21
Play appear.
ZOOM 2X/4X/2X/Normal inorder P 36
- These functions may not work depending on MPEG4 file.
CD-R AVI file
This unit can play the following video compression formats
within the AVl file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG4 Simple Profile)
- DivX 5 contents (MPEG4 simple profile plus additional
features such as hi-directional frames. Qpel and GMC are
also supported.)
- XviD MPEG4 compliant Contents.
This unit supports all resolutions up to maximum below.
DivX3.11& DivX4 & XviD
Bitratemayfluctuate:
Devicemay skipdecoding
the highbitrateportions
andbegindecodingagain
whenBitratereturnsto
normal.
DivX5
720x 480 @30fps
720x 576 @25fps
: Maximumbitrate: 4Mbps
Note
- Some MPEG4 files created on a personal computer may not be play back.
That is why Codec Type, Version and Higher resolution over specification is not supported.
- This unit supports CD-R/RW written in MPEG4 in accordance with the "1SO9660 format".
ENG-41
ADVANCEDFUNCTIONS
Picture CD Playback
1
Select the desired folder.
?See#age 37/
2
Press the Jl,/T buttons to
setect a Picture file ir the
clius menu and then Dress
the ENTER button.
3
Press the INFO button tc
display the menu
Press the 4 t,. buttons to
select the menu you wan1
[Oview. inert Dressthe
ENTER button.
Note
Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Rotation
t [_'-1 : Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
Zoom
(_: Press the A/T buttons to select the part of the screen
you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 2X.
: The pictures change automatically with about a
6o
second interval.
: The pictures change automatically
witho
about a 12 second interval.
: The pictures change automatically
with
o
about a 18 second interval.
Slide Show
• _ : The unit enters slide show mode.
• Before beginning the Slide Show, the picture interval must be
set.
Note
- Depending on a file size, the amount of time between each picture may be different from the set interval
time.
- If you don't press any button, the slide show will start automatically in about 10 seconds by default.
ENG-42
I ADVANCED FUNCTIONS I
MP3-JPEG Playback
You can play JPEG photo file using music as a background.
12¸ /I ii!il iii ! i
press the Ai¥ buttons to
select a JPEG file in the
Clips menu and then
PgeSslhe ENT
Press STOP button when
you want to stop th e
playback.
-,4 Music will play from the beginning.
Note
MP3 and JPEG files have to be on the same
disc.
CD-R JPEG Discs
- On y files witn the ".jpg" and ".JPG" extensions can be played.
- If the s sc is not closes it will take longer to siart playing and not all of the recorded files may Be prayed.
- Onty CD-R discs with JPEG files in ISO 9660 or Joliet format can be ulayed.
- The name of the JPEG rite may not be longer than 8 characters and should contain no blank spaces er special characters
L/=÷
- Onty aconsecutively wnlren multi-session disc can De played. If there is a blank segment in the multPsessior disc. the dtsc can
be olayed only up to the blank segmen[.
-A maximum of 3000 mages can be stored on a single CD.
- Kodak PictL'e CDs are recommences
- When playing a Kodak Picture CD. onty the JPEG files in the ulcturesfo uer can be played.
- Kodak Picture CD: The JPEG files in the _ictures folder can be prayed automatically.
- Konica Pic[ure CD: If you want to see the Picture. select the JPEG files in the clips menu.
- Fuji Picture CD: If you want [o see the Picture. setect the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 500. only 500 JPEG files can be playee.
- If the number of folders in 1 Disc is over 500. on _ JPEG files in 500 folders can be playeo.
ENG-43
CHANGINGSETUPMENU
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, even adjust the player to the type of television screen you
have.
1
With the unit in Stop
mode, press the MENU
button on the remote
control,
Press the Jl,i T buttons to
select Setup, then press
the I_ or ENTER button,
O Language Setup : Setup of the Language,
@ Audio Setup : Setup of the Audio Options,
@ Display Setup :Setup of the Display Options, Use to select which type of screen you want to
watch and several display options,
0 Parental Setup : Setup of the Parental Level, Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult
subject matter, etc,
_) DivX(R) Registration : Please use the Registration code to register this player with the DivX(R)
Video On Demand format, To learn more go to www,divx,com/vod.
Press the Jl,/T Dut[ons to
access the different
features. Press the I_ or
ENTER button to access
the sub features.
3
To make tne setup screen
disappear after setting up,
Dressthe MENU button
again.
Note
Depending on the disc, some Setup menu
selections may not work.
ENG-44
I
CHANGING SETUP MENU
I
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stot:
moee Dressthe MENU
buEon.
2
Press me 4,/5' buttons to
select Setup, then press
tne _ or ENTER button.
3
Press the A/T buttons to
select Language Setup,
ther oress the _- or
ENTER Du[ton.
4
Press the 4,/5' bu[tons to
select Player Menu. then
press me I_ or ENTER
button.
5
Press the A/T buttons to
select the desired
anguage, then Dressthe
I_ or ENTER Du[ton.
-,9 - The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-45
CHANGINGSETUPMENU
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
With the unit in Stop
moee, press the MENU
But[on.
2
Press the &/T buttons to
select Setup, then press
the • or ENTER button.
3
Press the &/T buttons to
select Language Setup,
then Dressthe • or
ENTER button.
4
Press the AiT _uttons
to select Disc Menu. then
Dressthe • or ENTER
DuEon.
5
Press the AiT buttons to
select the desired
language, then press me
• or ENTER button.
-,q - If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-46
I
CHANGING SETUP MENU
I
Using the Audio Language
1
Withtheunit in Stop
mode.oressthe MENU
button.
2
Pressthe AiT buttonsto
selectSetup,thenpress
the • or ENTERbutton.
3
Press the &/T buttons to
select Language Setup,
then oress the _ or
ENTER button.
4
Press the A, • buttons to
select Audio. then Dress
the • or ENTER uuIton.
5
Pressthe Ai• buttonsto
selectthe desired
anguage,thenDressthe
I_ or ENTERbutton.
- Select "Original" if you want the default
soundtrack language to be the original
language the disc is recorded in.
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
- The language is selected and the screen
returns to Language Setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-47
I CHANGING SETUP MENU I
Using the Subtitle Language
1
Withthe unitin Stot:
mode.oresstheMENU
button.
2
3ressthe _,/T buttonsto
selectSetup,thenpress
tne I_ or ENTERbutton.
'k
3
=ress tne A/T buttons to
select Language Setup,
men press the I_ or
ENTER button
4
3ressthe A/_r buttonsto
selectSubtitle.then 3ress
the _ or ENTERbutton.
5
=ress the A/Y buttons to
select the desired
language, then oress the
_,-or ENTER button
iiii_
- Select "Automatic" if you want the subtitle
language to be the same as the language
selected as the audio language.
- Some discs may not contain the language you
select as your initial language; in that case the
disc will use its original
language setting.
- The language is selected and the screen
returns to setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-48
CHANGINGSETUP MENU
Using the DivX Subtitle Language
With the unit in Stop
mooe, press the MENU
BUtton.
2
Press the J,!T buttons to
setect Setup, men press
the P- or ENTER button.
3
Press the J,/T buttons to
select Language Setup,
then press the I_ or
ENTER button.
4
Press the A/V buttons to
seteci DivX Subtitle. men
Dress the J,- or ENTER
PUIIOn.
iiii_
5
Press the AiT buttons to
setec[ the desired
language, then press the
I_ or ENTER button.
-,9 - The language is selected and the screen
returns to setup menu.
- To make the setup menu disappear, press the
MENU button.
ENG-49
I CHANGING SETUP MENU I
Setting Up the Audio Options
Audio Options allows you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
moae. Dress the MENU
button.
M_N
2
Press the • • buttons to
select Setup, then press
tne• or ENTER button.
3
Press the J,/y buttons to
select Audio Setup, then
press the • or ENTER
but[on.
4
Press the &iT bu[tons to
select the desired item
ther oress the • or
ENTER Du[ton.
-,9 To make the setup menu disappear, press the
MENU button.
ENG-50
CHANGINGSETUPMENU
O Digital Out
- PCM : Converts to PCM(2CH) audio,
- Bitstream : Outputs Dolby Digital via digital output,
Select Bitstream when connecting to a Dolby Digital Decoder,
DTS
Select On when connecting to DTS Decoder.
- On :Outputs DTS Bitstream via digital output.
- Off : Doesn't output digital signal
Note
• There is no analog audio output when you play a DTS disc.
@ Dynamic Compression
- On :To select dynamic compression. This is useful for watching movies late at night, as it
balances the load and quiet portions of a disc.
- Off :To select the standard range.
0 PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Note
Even when PCM Down sampling is Off
• Some discs will only output down sampled audio through the digital outputs.
- If your TVis not compatible with compressed multi,channel formats (Dolby Digita, DTS,
MPEG), you should set Digital Audio to PCM.
- If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM
Down sampling toOn.
Note
• To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
ENG-51
I CHANGING SETUP MENU I
Setting Up the Display Options
Display options enable you to set various video functions of the player.
With the unit in Stop
moae. Dressthe MENU
button.
2
Press the ,l,!V buttons to
select Setup, then press
the _ or ENTER button
3
Press the A!V buttons to
select Display Setup,
then oress the _ or
ENTER buttor..
4
Press the AiT buttons to
setect the desired item.
then oress the I_ or
ENTER button.
-.4 To make the setup menu disappear, press the
MENU button.
ENG-52
CHANGINGSETUPMENU
I
O TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen, Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
Still Mode
These options will help prevent picture shake
in still mode and display small text clearer,
- Auto : When selecting Auto, Field/Frame
mode will be automatically ajusted.
- Field : Select this feature to minimize
screen shaking,
- Frame : Select this feature when you want
to read text more clearly on the screen,
_) Screen Messages
Use to turn on-screen messages On or Off.
O Progressive Out
- ON : Select when you want to use the
component (480p) progressive.
- OFF : Select when you want to use
Video/S-Video/component interlace
scan (480P)/HDMI (480p/720p/
1080i/1080p) output.
HDMI
This setting is used when the unit is
connected by HDMI to Display devices (TV,
Projector, etc,),
- Resolution Setting
The resolution setting is dependent on the
capability of your TV or Monitor,
- Auto : Auto resolution setting
- Manual: Resolution setting manually
- Resolution
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
• 1080p : 1920 x 1080
For best video performance, check your
TV's user manual for proper resolution
setting.
- Format
You can use this function to set HDMI
output's Format.
- TV - RGB : Select this when you want to
connect to a RGB supported TV.
- Monitor : Select this when you want to
connect to a monitor device.
- TV : Select this when you want to
connect to standard TV.
- Contrast
This setting is defined as the ratio
between the maximum and minimum
Contrast values in a picture,
(Level 1~ Level 5).
ENG-53
CHANGINGSETUPMENU I
- Sharpness
To adjust the picture smoothness (Level1 ~
Level 5).
- Noise Reduction
This setting can be used to reduce image
noise that spread out on the screen
(Level 1 ~ Level 5).
- Edge Enhancement
To adjust the picture softness. This is a
digital image processing filter that is used to
make pictures look sharper than they really
are.(Level 1 _ Level 5).
• If Video Output is set incorrectly, the
screen may be blocked.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user's manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you have HDMI connected, better
picture quality will be provided when the
output is set to 720p,1080i or 1080p.
• If you press the VIDEO SEE button,
Video output mode is changed in regular
sequence.
(Progressive :ON _ Progressive : OFF)
@ Picture Quality
- Black Level : Adjusts the brightness of the
screen.(On or Off) It does not function in
Progressive mode.
- Brightness : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
• Consult your TV User's Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User!s Manual regarding
Progressive Scan settings in the TV's
menu system.
ENG-54
I
CHANGING SETUP MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating levels
on a disc.
Setting Up the Rating Level
1
With the unit in Stop
mode. oress the MENU
button.
2
Press the AiT buttons to
select Setup, then press
[he _ or ENTER button.
3
Press the AiT buttons to
select Parental Setup,
tnen 3ress the I_ or
ENTER button.
4
Press tne _,- or ENTER
button to select Yes if you
want to use a passwore.
The Enter Password
screen appears.
5
Enter your passwore,
6
Press the AiT buttons to
select the Use Password
you want. then Dressthe
I_ or ENTER button.
e.g) Setting up in No.
To make the setup menu disappear, press the
MENU button.
ENG-55
CHANGINGSETUPMENU
With the unit in StoB
mooe. Dress the MENU
button.
2
Press the Air buttons to
select Setup, then press
me _- or ENTER button.
3
Press the A/V buttons to
select Parental Setup,
ther eressthe I_ or
ENTER i)u[ion.
Press the A/5' to select
Rating Level, then press
then press the _- or
ENTER button.
The Enter Password
sc!een appear&
Enter YOUi"PaSSWOrd.
Press the A!V buttons to
select the
you want, then press the
I_ or ENTER button.
e;g) Setting up in Kids
Safe,
-,9 To make the setup menu disappear, press the
MENU button.
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
ENG-56
I
CHANGING SETUP MENU
I
Changing the Password
1
With the unit in Stop
mode press the MENU
DU[[On.
2
Press [ne I/T buttons to
setec[ Setup, then press
the • or ENTER button.
3
Press the &/T buttons to
select Parental Setup,
then press the • or
ENTER button.
4
Press the J, iV button to
select Change
Password. ther press me
• or ENTER button.
Enter your password.
Then enter your men
Dasswora.
_,I To make the setup menu disappear, press the
MENU button.
Note
If you have forgotten your password, see
"Forgot Password" in the Troubleshooting Guide.
ENG-57
REFERENCE
Controlling a TV with the Remote control
The remote control can also be set up to control most TVs. To program the remote
control, use the code that corresponds to your brand.
BRAND
ANAM
AIWA
BANG&OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
CONTINENTALEDISON
DAEWO0
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
TV Codes
CODE
10, 11, 12, 13, 14, 15, 16, 17, 18
82
57
71
73
57
52
75
19,20,23,24,25,26,27,28,29,
30,31,32, 33, 34
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61,79
06, 19,20,21,22,78
06, 69
06, 57
40
57
06, 48, 62, 65
52, 77
83
68
66
BRAND
NORDMENDE
NOKIA
PANASONIC
PHILIPS
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
REX
SABA
SALORA
SAMSUNG
SANYO
SCHNEIDER
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSONASIA
TOSHIBA
WEGA
YOKO
ZENITH
CODE
72, 73
74
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74, 75
06, 56
57
45, 46
74
57, 72, 73, 74, 75
74
01, 02, 03, 04, 05, 06, 07, 08, 09
41,42, 43, 44, 48
06
74
36, 37, 38, 39, 48
71
57
57
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
57
06
63
1.Turn on the TV.
2.Point the DVD's remote control at the TV,
&While holding the TV POWER button down, enter the code for your brand,
4,If the TV turns off, setup is complete. Enter other codes of the same brand if the
first code does not work.
The remote control may not be able t° control every model "rv of the brands !iste&
If you replace the remote contrors batteries, set the brand code again,
e.g) For SamsungTVs
While holdingdown the TV POWERbutton, enter0 and then 1.
ENG-58
I REFERENCE
Firmware upgrade
Introduction
Samsung will often support the software upgrade to improve the performance of this unit to the latest
status, through Samsung Internet Site (www.samsung.com).
Because the specially new mpeg4 codec continues and it is appearing, What improvements are
made depends on the upgrade software you are using as well as the software that your DVD-player
contained before the upgrade,
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings:
You haveto downloada new'file
throughDownloadCenterof
Samsung InternetSite
(www:samsung.com),
2 Note
Writethefileto Discusing - File System CD-ROM ISO Level
CD_RWof Yourcomputer, - Character set ISO 9660
- Finalized, single session
- Write speed low
Upgrade procedure
1
Openthedisc tray.
Placethedisc onme iray.
Closemeiray.
The Firmwareupgraee
screenappears
2
Pressthe _111_buttonsto
selectTotal. thenpressthe
ENTERbutton.
Firmwareupgrade
appearsonthedisplay
Firmwareupgradestarts
-,q - In the middle of the writing, the tray will open
automatically. After taking out the disc,
please wait for about 2 minutes.
- If the unit was successfully updated, the unit
will turn off and on after closing the tray
automatically. When the unit turns on, this
screen will display.
3
Press me numDer ouEons
to select the desired
language.
Note
- If the "Select Menu Language" doesn't appear,
please contact to "Samsung Service Center".
- Do not press any button and unplug the power
code during upgrade.
- The upgrade procedure may change, refer to
the web site (www.samsung.com).
ENG-59
I
REFERENCE
Troubleshooting
Before requesting service, please check the following.
Problem Action Page
No operations can be • Check the batteries in the remote control.
performed with the They may need replacing.
remote control, • Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to P5
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again,
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD. P8
5.1 channel sound is • 5.1 channel sound is reproduced only when the following conditions are met. :
not being reproduced. 1) The DVD player is connected with the proper Amplifier P19
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "5.1 ch" mark on the outside,
• Check if your audio system is connected and working properly. P50_51
• In a SETUP Menu, isthe Audio Output set to Bitstream?
The _ icon appears • The features or action cannot be completed at this time because:
on screen. 1. The DVD's software restricts it.
2. The DVD's softwaredoesn'tsupportthe feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out of range.
DiscMenudoesn'tappear. • Check if the disc has a Menu.
Play modediffers from • Some of the functions selected in the Setup Menu may not work properly if the
the Setup Menu disc is not encoded with the corresponding function. P44_57
selection.
The screen ratio • The Screen Ratio is fixed on your DVDs. P52_54
cannot be changed.
No audio. • Make sure you have selected the correct Digital Output in the Audio Options P50-51
Menu.
The screen is blocked • Press the _ button (on the front panel) for more than 5 seconds withno disc P20
inside. All settings will revert to the factory settings.
Forgot password • Press the _-_,1button (on the panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings. P55_57
Don't use this unless absolutely necessary.
If you experience other • Go to the contents and find the section of the instruction book that contains
problems, the explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
The picture is noisy or • Make sure that the disc is not dirty or scratched.
distorted . Clean the disc. P4
ENG-60
REFERENCE
Problem Action Page
No HDMI output. • Check the Video output is set to Progressive out off.
• Check the connection between the TV and the HDMI jack of DVD player. P16~17
• See if the TV supports this 480p/720p/1080i/1080P DVD player.
Abnormal HDMI output • If snow noise appears on the screen, it means that TV does not support P16~17
screen. HDCP (High-bandwidth Digital Content Protection).
HDMI output Jitter • Check your TV system setup correctly.
• Screen Jitter may occur when frame rate is converted from 50Hz to 60Hz for
720P/1080i/1080P HDMI (High Definition Multimedia Interface) Output. P52~54
• Please refer to the user's manual of your TV.
ENG-61
I
REFERENCE
I
Specifications
General
Disc
Video
Output
Audio
Output
Power Requirements AC 120V _ 60 Hz
Power Consumption 15 W
Weight 2.3 Kg
Dimensions 16.93" (W) X 8.07" (D) X 1.77" (H)
Operating Temperature Range +41 °F to +95°F
Operating Humidity Range 10 % to 75 %
DVD Reading Speed : 3.49 _ 4.06 m/sec.
(DIGITAL VERSATILE DISC) Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
....................__!"__ ........................_;_i_;_'_ee'_":'_'.'8"_"_'.'_"_'_c:.............................................
(COMPACT DISC) Maximum Play Time :74 min,
CD : 8Cm Reading Speed : 4.8 _ 5.6 m/sec.
(COMPACT DISC) Maximum Play Time : 20 min,
Composite Video 1 channel : 1.0 Vp-p (75 f_ load)
Y : 1.0 Vp-p (75 f_ load)
Component Video Pr : 0.70 Vp-p (75 _ load)
Pb : 0.70 Vp-p (75 f_ load)
Luminance Signal : 1.0 Vp-p (75 _ load)
S-Video ..Chrom!na.n.ce..S!gna[.[.9...3..Vp._.l?..(7.5._.!oad)...............................
HDMI 480p, 720p, 1080i, 1080p
2 Channel L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
96 kHz Sampling : 4 Hz to 44 kHz
*S/N Ratio 110dB
.............. ...........................................................................................................
*Total Harmonic Distortion 0.005 %
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with
out notice.
- Weight and dimensions are approximate.
ENG-62
Warranty
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts / Ninety (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the
United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must be
performed by SAMSUNG's authorized service center. To receive warranty service, the original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation
to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found
to be defective during the limited warranty period specified above. The product must be returned during the warranty
period with transportation charges prepaid to SAMSUNG's designated service center. Prior to returning any product for
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. SAM-
SUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the
remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncom-
mercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs in
shipment; applications and uses for which this product was net intended; failures or problems which are caused by
products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire, water, light-
ning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by improper or
faulty installation; improper connection with any peripheral; product alteration or modification; improper or unautho-
rized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow operating
instructions, customer adjustments, maintenance and environmental instructions that are covered and prescribed in
the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment which damage
this product or result in service problems; failures or problems due to incompatibility with other equipment.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
North America
Latin America
Europe
CIS
Asia Pacific
Middle East & Africa
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
RER DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Center
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15/Min)
01805 - 121213 (0,12/Min)
06 40 985 985
199 153 153
02261 03710
0900 20 200 88 (0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
Web Site
www.sarnsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre,
1-800-SAMSUNG (7267864)/www,samsung,com
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park,NJ 07660-0511
1-800-SAMSUNG (7267864)
www,samsung,com
AK68-01038D
