Loading ...
Loading ...
Loading ...
Oven C eaning
f
• i_l 3 sec
:!:i!!!!!!!!!!!!!!!!!!!!::....
• • • Oven
_roii • Preheat
• DoorLocked
;Cook
Time
Ste,
V so,/o. Time
Note: DO NOT attempt to use the surface eUements while oven is seff=cUeaning,An automatic safeguard Uocksoff the
surface elements during self-cleaning, You cannot use the surface elements until the oven door can be opened after
the cleaning cycle is complete,
To Start the SeJf-Clean CycJe
For satisfactory results, use a 2 hour self-clean cycle for Jight soils, and a 3 hour cycle for average to heavy eoite.
Note: The kitchen area should be ventilated using an open window,ventilation fan or exhaust hood during the first sel-
clean cycle, This will help eliminate the normal odors associated with the first self-clean cycle,
To Set the Controls for a Self-Clean Cycte:
1, Be sure the clock shows the correct time of day,
Press _, "- - -" appears in the
2,
display,
3, Press _. until "3:00" appears in the display for a 3 hour cycle, or press the v until "2:00" appears in the display for
a 2 hour cycle,
4, As soon as the A or v is released, "CLn" appears in the display,
5, As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCKED"
indicator light will flash, DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to
lock),
6, The "LOCK" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled,
When the Serf-Clean Cycte is Completed:
1, The time of day or "End" wiii appear in the display window and the "Clean" and "LOCK" light wiii continue to glow,
2, Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened,
3, if "End" is still in display and the "Clean" indicator remains on, press _, The time of day will appear in the display,
Note: When the oven is cool, wipe away any residue or sowered ash with a damp cloth or paper towel,
Stopping or interrupting a Serf-Cleaning CycJe
If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire:
1, Press @,
2, Once the oven has cooled down for about 1 HOUR and the "LOCK" indicator light has gone out, the oven door can be
opened,
3, Restart the self-clean cycle once all conditions have been corrected,
_To avoid possibHe burns use care when opening the oven door after self=cleaning cycle, Stand to the side of
the oven when opening the door to allow hot air or steam to escape,
DO NOT force the oven door open, This can damage the automatic door locking system, Use caution and
avoid possible burns when opening the door after the self-cleaning cycle has completed, The oven may still be VERY HOT,
17
::::[1!!!!!1
!!_ii Si
:i:iiii:!iii_
Loading ...
Loading ...
Loading ...