Loading ...
Loading ...
Loading ...
Contro Pad Features
Note: The appearance of your oven controU may differ sfightUyfrom the one HUustratedbeUow, However, aH functions are
the same, AUso,push buttons or pads may be shaped differentUy than those appearing in this Use and Care Guide,
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described beUow,
STOP CLEAR PAD-- Used to clear
any function previously entered
except the time of day and minute
timer. Push STOP CLEAR to stop
cooking, \\
\
x
BAKE PAD-- '_
Used to
enter the normal
baking mode
temperature.
BROIL-- Used to
seIect the •
variable broil
function.
SELF CLEAN
PAD-- Used to j
select the self-
cleaning cycle.
UP and DOWN ARROWS PADS -- Used along with
the function pads to select oven temperature, cooking
time, stop time (when programming an automatic stop
time), time of day, clean time and minute timer.
• • Oven
• Preheat
• OoorLocked .............
/
/
/
/
OVEN, PREHEAT & DOOR LOCK LIGHTS*-- The "OVEN" light will glow
each time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" might will gtow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature. The
"LOCK" Bight will flash until the door locks when the self-clean cycle is in
use. It glows constantly after the door locks.
TIMER SET/OFF PAD --
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking.
CLOCK PAD-- FEATURE
Used to set the INDICATOR
time of day. LIGHTS-- These
fight to show
/ which feature is
in use.
COOK TiME
PAD -- Used
to enter the
length of the
baking time (if
equipped),
STOP T_ME
PAD -- Used
to set the
desired stop
time for baking.
Can be used
with BAKE
TIME to
program a
delayed bake
cycle (if
equipped).
P[eheat. This is normal and indicates that the oven is cyc!ing to ma!nta!n the se!ected baking temperature. When
preheat indicator light turns OFF, your oven is ready.
For a silent contro_ panel:
When choosing a function, a beep will be heard each time a pad is pressed, If desired, the controls can be programmed
for silent operation, Press and hold @, After 7 seconds, the control will beep once, This will block the controls from
sounding when a pad is pressed, To return the sound, press and hold @ again for 7 seconds until 1 beep is heard,
Note: The control will return to the audible mode after a power outage,
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory, The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C),
To change the temperature to °C (celsius) or from °C to °F (control should not be in a Bake or Ctean mode):
1, Press _, "- - " appears in the display,
2, Press and hold the A pad until "HI" appears in the display,
3, Press and hold _ until °F or °C appears in the display,
4, Press _,_ or v pad to change °F to °C or °C to °F,
5, Press any function pad to return to normal operating mode,
10
Loading ...
Loading ...
Loading ...