Loading ...
Loading ...
Loading ...
23
16 HELP IN CASE OF MALFUNCTION
CAUTION!
Risk of injury
Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care and cleaning work.
■
Switch off the appliance and remove the rechargeable battery.
Malfunction Cause Remedy
Engine does not run. No battery voltage present. Have the power supply checked by a
qualified electrician.
Overload protection has
switched off.
Wait until the overload protection re-
establishes the power supply.
Chain brake engaged. Release the chain brake.
The guide rail and saw
chain become hot when
running. Generation of
smoke.
The saw chain is tensioned
too tightly.
Reduce chain tension.
Oil tank is empty. Replenish the saw chain oil.
Inspect the oil tank for damage.
The oil entry hole and/or
groove of the guide rail are
dirty.
Clean the oil entry hole and groove of the
guide rail.
Motor running, but the saw
chain does not move.
The saw chain is tensioned
too tightly.
Reduce chain tension.
Appliance faults Contact a Masport service centre.
Only sawdust is thrown out,
rather than wood chips.
The chain saw has to be
pushed through the wood.
The saw chain is blunt. Sharpen the saw chain or contact a
Masport service centre.
Appliance vibrates
unusually.
Appliance faults Contact a Masport service centre.
NOTE
If you encounter any malfunctions that
are not listed in this table or that you
cannot rectify yourself, please contact
your local service dealer.
17 TRANSPORT
WARNING!
Danger of fatal injury and danger of
extremely severe injury.
During transport, a running saw chain
can lead to extremely serious and even
fatal injury.
■
Never carry and transport the chain
saw with the saw chain running.
■
Before transporting, carry out the
measures mentioned above.
Loading ...
Loading ...
Loading ...