Loading ...
Loading ...
Loading ...
16 CS 4030
12.1 Charging the rechargeable battery (02 -
Page 6)
The rechargeable battery is partially charged.
Fully charge the rechargeable battery before
using it for the first time. The rechargeable
battery can be charged in any charge status.
Interrupting charging does not damage the
rechargeable battery.
NOTE
For detailed information, heed the
separate operating instructions for the
rechargeable battery and for the
charging unit.
12.2 Inserting the rechargeable battery (03 -
Page 6)
1. Push (03/A) the rechargeable battery (03/1)
into the rechargeable battery slot (03/2) from
above until it engages.
12.3 Pulling out the rechargeable battery (03)
1. Press and hold the unlock button (03/3) on
the rechargeable battery (03/1).
2. Pull out (03/B) the rechargeable battery
(03/1).
12.4 Checking the chain tension
Frequently check the chain tension, because new
saw chains stretch.
At operating temperature, the saw chain
stretches and hangs down.
NOTE
The saw chain has been tensioned
correctly when:
It is in contact with the underside of
the chain bar and can be pulled
through by hand.
It can be lifted by 3 – 4 mm in the
middle of the chain bar.
CAUTION!
Danger of injury due to the saw chain
jumping off!
An insufficiently tensioned saw chain
can jump off during operation and lead
to injury.
Frequently check the chain tension.
The chain tension is too low if the
drive links come out of the groove
on the underside of the chain bar.
Re-tension the saw chain properly if
the chain tension is too low.
12.5 Testing the function of the chain brake
The chain saw has a manual chain brake that is
triggered by the hand guard, for example if
kickback occurs.
When the chain brake is triggered, the saw chain
is abruptly stopped and the engine switched off.
DANGER!
Danger of fatal injury as a result of
negligent handling!
Extremely serious injury and even fatal
injury can be caused as a result of
careless and unexpected movements of
the chain saw.
Pay attention to safety and work with
a high level of concentration when
using the chain saw.
Do not press any switch when
releasing the chain brake.
WARNING!
Danger of fatal injury and danger of
extremely severe injury due to a
defective chain brake
Extremely serious injury and even fatal
injury of the operator can be caused if
the chain brake does not function, e.g.
due to kickback by the running saw
chain.
Check the chain brake each time
before starting work.
Do not switch the chain saw on if the
chain brake is defective. in this case,
have the chain saw checked at your
local service dealer.
Loading ...
Loading ...
Loading ...