Loading ...
Loading ...
Loading ...
15
11 INSTALLATION
WARNING!
Danger of serious injury.
If an incompletely mounted chain saw is
used, serious injury can be caused.
■
Only use the chain saw when it has
been fully mounted.
■
Before each use, perform a visual
inspection in order to check that the
chain saw is complete and does not
contain damaged or worn
components. Safety and protective
devices must be intact.
CAUTION!
Danger of laceration injuries.
The sharp edges of the saw chain can
cause laceration injuries when
assembling.
■
Before installation, remove the
rechargeable battery.
■
Wear safety gloves when installing
the saw chain and the guide rail.
11.1 Installing the guide rail (05, 06 - Page 7)
1. Pull hand guard (05/1) in the direction of the
handle (05/A) in order to release the chain
brake.
2. Turn the central lock (05/2) anti clockwise
and remove together with the cover (05/3).
3. Set the guide rail (06/1) on the guide pin
(06/2) and push so far back that the saw
chain can be mounted.
11.2 Installing the saw chain (05, 06)
1. Place the saw chain on the chain sprocket
(06/3) and in the groove of the chain bar
(06/1).
2. Guide the saw chain around the reversing
sprocket of the chain bar. The saw chain
must hang down slightly on the underside of
the chain bar.
3. Put the cover (05/3) and tighten the central
lock (05/2) slightly.
11.3 Tightening the saw chain (05, 07 - Page
7)
NOTE
The saw chain has been tensioned
correctly when:
■
It is in contact with the underside of
the chain bar and can be pulled
through by hand.
■
It can be lifted by 3 – 4 mm in the
middle of the chain bar.
1. Check the seat of the saw chain so that it sits
correctly on the chain sprocket and in the
chain bar.
2. Turn the rotating ring (05/4) towards the
cover (05/3) so that the two triangles face
each other (05/B).
3. Put on the cover (07/1) and turn the central
lock (07/2) clockwise. Do not tighten the
central lock fully or turn back by one turn.
4. Turn the rotating ring (07/3) clockwise until
the saw chain has been tensioned correctly
as described above.
5. Turn the central lock (07/2) clockwise until it
is fixed in place.
12 START-UP
DANGER!
Danger of fatal injury and danger of
extremely severe injury.
Lack of knowledge of the safety
instructions and operating instructions
can lead to extremely serious and even
fatal injury.
■
Read and follow all safety
instructions and instructions for use
in these operating instructions as
well the operating instructions which
are referred to before you start using
the chain saw.
WARNING!
Danger of serious injury.
Serious injury can be caused if there are
damaged components on the chain saw.
■
Before each use, perform a visual
inspection in order to check that the
chain saw is complete and does not
contain damaged or worn
components. Safety and protective
devices must be intact.
Loading ...
Loading ...
Loading ...