Loading ...
Loading ...
Loading ...
12 CS 4030
The noise and vibrations of the tool may
increase due to improper use and
maintenance. This leads to health damage.
In this case, immediately switch off the tool
and have it repaired by an authorised service
workshop.
The degree of stress due to vibration
depends on the work to be performed or on
the use of the tool. Estimate the stress and
plan appropriate work breaks. This
considerably reduces stress due to vibration
over the entire working time.
Extensive use of the tool exposes the
operator to vibrations, which can lead to
circulatory issues (“white fingers”). To avoid
this risk, wear gloves and keep your hands
warm. If any symptoms of “white fingers”
occur, immediately consult a physician.
These symptoms include: Numbness, loss of
feeling, tingling, itching, pain, reduced
muscular strength, changes in the colour or
condition of the skin. Normally these
conditions affect the fingers, hands or pulse.
The risk increases at low temperatures.
Take long breaks during your working day so
you can recover from the noise and the
vibrations. Plan your work in such a way that
the use of appliances that generate strong
vibrations is spread over several days.
If you notice an unpleasant sensation or
discolouration of the skin on your hands
when using the tool, stop work immediately.
Take sufficient work breaks. Without
sufficient breaks, a hand/arm vibration
syndrome can occur.
Minimise your risk of being exposed to
vibrations. Maintain the tool according to the
instructions in the operating instructions.
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
Avoid working with the tool at temperatures
below 10 °C. Define how the vibration load
can be limited in a work plan
7 NOISE POLLUTION
A certain level of noise exposure from this
appliance is inevitable. Carry out noisy work at
approved and specified time periods. Observe
rest periods as necessary and restrict the
duration of the work to a minimum. For your
personal protection and protection of persons in
the vicinity, appropriate hearing protection must
be worn.
8 SAFETY INFORMATION REGARDING
THE RECHARGEABLE BATTERY
This section mentions all the basic safety and
warning information to be heeded when using the
rechargeable battery. Read these instructions.
Only use the rechargeable battery as
designated, i.e. for Masport rechargeable
battery-driven appliances. Only charge the
rechargeable battery with the Masport
charging unit.
Only unpack the new rechargeable battery
from the original packaging when it is to be
used.
Fully charge the rechargeable battery before
using it for the first time and always use the
specified charger. Comply with the details
given in these instructions for use for
charging the rechargeable battery.
Do not use the rechargeable battery in
environments where there is a potential risk
of explosion and/or fire.
Do not expose the rechargeable battery to
moisture and humidity when in use with the
appliance.
Protect the rechargeable battery from heat,
oil and fire to prevent it being damaged so no
vapours and electrolyte liquids can escape.
Do not subject the rechargeable battery to
impacts or throw it.
Do not use the rechargeable battery when
soiled or wet. Before use, clean and dry the
rechargeable battery with a dry, clean cloth.
When battery pack is not in use, keep it away
from other metal objects, like paperclips,
coins, keys, nails, screws or other small
metal objects that can make a connection
from one terminal to another. Burns or fire
can result from a short-circuit.
Do not open, dismantle or crush the
rechargeable battery. There is a danger of
electric shock and short-circuit.
An improperly used and damaged
rechargeable battery can cause vapours and
electrolyte liquid to escape. Vent the room
adequately and in the case of any disorders,
consult a doctor.
If accidental contact with electrolyte liquid
occurs, flush with water and thoroughly rinse
the eyes immediately. Then consult a doctor.
Loading ...
Loading ...
Loading ...