Loading ...
Loading ...
Loading ...
RE-INSTALLING THE CHUCK AND ARBOR
t. Clean thetaperedsurfaceonthearborwitha clean
cloth.Makesuretherearenoforeignparticlesstick-
ing to the surface. The slightestpiece of dirton
this surface will prevent the arbor from seating
properly.Thiswillcause the drillto "wobble."
2. Slide arbor intospindleon drillpress.
3. Push up on chuck/arbor assembly as you rotate
them. You will feel rectangular end of arbor slip
_otoa notchin the spindle.
WARNING: MAKE SURE THE RECTANGULAR END
OF THE ARBOR HAS SLIPPED INTO THE NOTCH
IN THE SPINDLE BEFORE GOING ON TO STEP 4.
FAILURE TO FOLLOW THIS DIRECTION MAY
ALLOW THE CHUCK TO COME LOOSE DURING
OPERATION, FLY OUT, AND HIT THE OPERATOR.
SPINDLE
ARBOR
CHUCK
SLEEVE
CHUCK
eDDY
4. Unlock supportlock and raise fable so its about
two (2) inchesbelow tip ofchuck.
5. Turn chuck sleeve clockwise and open jaws in
* chuck'completely.
6. Turn feed handles counterclockwiseand force
chuckagainsttable untilarbor is secure.
SUPPORT
LOCK
FEED
HANDLE
CHUCK
CHUCK
SLEEVE
22
Loading ...
Loading ...
Loading ...