Loading ...
Loading ...
Loading ...
into the holes.
3. Secure the ash lip with the washers and nuts provided.
4) How to attach the Ideal Steel Hybrid Door Handle:
For shipping purposes the door handle for your Ideal Steel stove has been packed in the firebox with the appropriate
hardware for installation. You will need a ½” socket and ratchet or wrench to install the handle.
1. Slide the small wave washer onto the bolt first.
2. Place the bolt through the hole in the handle. Slide the large spacer washer over the bolt so that it is between the
handle and the exterior of the loading door.
3. Place the handle through the hole on the door and line up the pin up with the slot in the door.
4. Using a wrench and a socket and ratchet, tighten the bolt until you feel some resistance when the handle travels up
and down.
OPTIONAL ACCESSORIES
Your Model 210 Ideal Steel Hybrid wood stove has several optional add-on components depending on individual
installation needs.
1) Rear Heat Shield: Reduces the rear clearance from the back of the stove to a combustible surface from 14” to 6”. See
page 8 for additional clearance details.
2) Pipe Shield: Reduces the clearance requirement for single wall connector pipe. See page 8 for additional clearance
details.
3) Outside Air Adapter: Typically required or recommended in certain installations, including Mobile Homes (HUD
Homes), WA State, tightly sealed construction, as well as certain state wood stove change-out programs. The outside air
adapter allows combustion air to be drawn directly to the stove from the outside or ventilated crawl space. The outside air
adapter easily attaches to the bottom of the stove (over the air intake) and has a 4” round collar to attach 4” ductwork. The
connecting ductwork (usually 4” aluminum dyer vent) should only run straight back or down, and the duct should be as
short and direct as possible.
4) Side Shelf: Part PG-29 can be seen on page 31 of the manual.
5) Hearth Tools & Tool Hanger: Includes a rake, poker, shovel, and side mount tool hanger (or optional stand): Made
right in our NH Factory, choose from a variety of designs (deer, leaves, moose, fish, dogs, etc.).
12
Wave Washer
Large Washer
The large spacer washer gets sandwiched between the door handle and the
OUTSIDE of the loading door. The lock nut will secure the door handle assembly on
the inside of the loading door.
Loading ...
Loading ...
Loading ...