Loading ...
Loading ...
Loading ...
Q
The tip of the line does the cutting. Allow the line to
trim at its own pace You will achieve better results by
not crowding the line into the cutting area. The right and
wrong ways are shown in Figure 16
o The line will easily remove grass and weeds from
around walls, fences, trees, and flower beds, but
it also can cut the tender bark of trees or shrubs
and scar fences. To help avoid damage to vegeta-
tion or trees with tender bark, shorten line to 4-5
inches and use less than full throttle
o The line wiU wear faster and will need to be advanced
more frequently when you are cutting against rocks,
bricks, concrete, metal fences, etc., than when cut-
ting against trees or wooden fences.
o For trimming or scalping, use less than full throttle
to increase line life and decrease head wear':
-- during light duty cutting,
-- next to rocks, bricks, concrete, metal fences, etc.
0
Formowing orsweeping, use full throttle for a good
clean job.
Avoid letting the trimmer head continuously contact
the ground during normal cutting. Constant contact
will cause trimmer head damage and premature wear
Figure x6
_W_G
Always wear eye protection. Never lean over the trim-
m_ head. Rocks or debrisean ricoche_ or be flirmm into
eyes and face and cause blindness or oiher seriom ir_jury.
x. - x7
Hold the tap button about 3 inches above the ground and
tilt the trinuner head atan angle Allow the tip of the line
to do the cutting, Do not force the trimmer line into the
work area
,_a_LPmG -- F_mee X8
The scalping technique removes unwanted vegetation
Hold the tapbutton about 3 inches above the ground and
tilt the trimmer head at anangle Allow thetip oftbe line
to strike the ground around trees, posts, monuments,
etc 7hi_ technique increa_e_ line wear
3, M@_rlN6 -- F_lm'e X9
Yourtnrrmler is ideal formowing in places conventional
lawn mowers cannot teach tn the mowing position_
keep the line parallel to the ground Avoid pressing the
head into the ground as this can scalp the ground and
damage the tool
4_
SWEEP_IG -- Figure :_O
The fanning action of the rotating line can be used for
a quick and easy clean up. Keep the line parallel to and
above the surfaces being swept and move the tool from
side to side,.
rtgm,ยข 17
F_m-e X9
Loading ...
Loading ...
Loading ...