Loading ...
Loading ...
Loading ...
4-20
REMOVING THE WATER RESERVOIR
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
3. Use the leveling screws and lower the
refrigerator onto the four rollers.
Base Grille
NOTE: If the water reservoir tubing located
inside the refrigerator compartment becomes
damaged, you can cut and splice a new reser-
voir in its place using two 5/16″ unions
(#4388201). If the tubing located under the
refrigerator is defective, it will be necessary to
remove the unit from its mounting location to
repair it. If that is the case, use the following
procedure.
2. Remove the two screws from the base
grille and remove the grille.
Screw
Screw
Tip Over Hazard
Refrigerator is top heavy and tips easily
when not completely installed.
Keep door taped closed until refrigerator
is completely installed.
Use two or more people to move and
install refrigerator.
Failure to do so can result in death or
serious injury.
4. Pull the refrigerator out of its mounting
location.
Leveling Screws
Rear Front
NOTE: The water reservoir and water valve
locations are shown below.
Water Reservoir
Water Valve
Unit Shown Tipped Back 45˚
Leveling Screws
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...