Loading ...
Loading ...
Loading ...
4-2
REMOVING THE UNIT COMPARTMENT COVER
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
power.
2. Lift the main decorative panel to unhook it
and remove the panel.
3. Lift and remove the louvered decorative
panel.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Main Decorative Panel
Louvered Decorative Panel
4. Remove the two hex-head screws from
the air diverter and remove the diverter.
5. Remove the nine hex-head screws from
the unit compartment front cover, and pull
the cover forward out of the way.
Air Diverter & 2 Screws
Unit Compartment Front Cover
NOTE: If there is less than 3″ above the top of
the unit compartment cover, perform Method A
to remove the cover. If there is at least 3″ above
the top of the unit compartment cover, Method
B will allow you to remove the cover without
pulling out the refrigerator.
Tip Over Hazard
Refrigerator is top heavy and tips easily
when not completely installed.
Keep door taped closed until refrigerator
is completely installed.
Use two or more people to move and
install refrigerator.
Failure to do so can result in death or
serious injury.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...