Loading ...
Loading ...
Loading ...
4. INTRODUCTION11. MAINTENANCE
- 5 -
- 20 -
$
FIG.21
FIG.22
11.1 ARBOR REMOVAL -
FIGS .21 - 22
To aid removal of the arbor from the spindle a
drift key is supplied.
Lower the spindle with the plunge handles to
expose slot $. Rotate the spindle to align
the inner and outer slots.
Insert the drift key and allow the spindle to
raise. Tap the drift key while supporting the
chuck.
Regular inspection and cleaning reduces the
necessity for maintenance operations and will
keep your tool in good working condition.
The motor must be correctly ventilated during
tool operation. For this reason avoid blocking
the air inlets. After use disconnect the tool
from the power supply and vacuum the
ventilation slots.
If the replacement of the supply cord is
necessary, this has to be done by the
manufacturer or his agent in order to avoid a
safety hazard.
At regular interval, lubricate the spindle with a
medium purpose grease. With the pulley
cover open, pack the grease down the centre
of the front pulley. Operate the plunger
mechanism and brush a thin film of grease on
the quill. Clean any debris built up in the
pulley housing. Spray a general purpose
lubricating agent/rust inhibitor on the other
moving parts and machined surfaces.
4.1 SCOPE
This general duty floor standing drill is ideal for most drilling applications at home or in a workshop
environment.
Suitable for drilling hard and soft wood, ceramics, plastics, metals and various composite
materials.
4.2 SPECIFICATION
Stock no. ............................................................................................................................. 02019
Part no. ........................................................................................................................ GD25/12EF
Rated voltage .............................................................................................................. 230V~50Hz
Rated input .......................................................................................................................... 1100W
Speed settings ............................................................................................................................ 16
Revolutions per minute (no load) ............................................................................ 160-3000 r/min
Drilling capacity .................................................................................................................... 25mm
Chuck capacity .................................................................................................................. 3-16mm
Spindle travel ........................................................................................................................ 80mm
Throat ................................................................................................................................. 255mm
Column Ø ............................................................................................................................. 80mm
Chuck to table .................................................................................................................... 620mm
Chuck to base ...................................................................................................................1135mm
Table tilt ................................................................................................................................... ±45º
Head rotation ........................................................................................................................... 360º
Table rotation ........................................................................................................................... 360º
Table dimensions .......................................................................................................356 x 356mm
Base dimensions .......................................................................................................485 x 290mm
Height ............................................................................................................................... 1635mm
Sound pressure level ...................................................................................................... 78.2dB(A)
Sound power level .......................................................................................................... 89.8dB(A)
Weight (nett) ............................................................................................................................86kg
4.3 HANDLING AND STORAGE
The environment will have a negative result on its operation if you are not careful. If the air is
damp, components will rust. If the machine is unprotected from dust and debris; components will
become clogged and if not cleaned and maintained correctly or regularly the machine will not
perform at its best.
Loading ...
Loading ...
Loading ...