Loading ...
Loading ...
Loading ...
- 14 - - 15 -
‘BEEP’
3.9 Change the Volume of the Melody
Press the volume buon to change the ringtone’s volume.
Each press will change the volume to one of six levels. Stop
pressing the volume buon your desired volume level is
reached.
4. Specificaon:
Receiver:
●
Power supply: DC 4.5V (3 x AA baeries or by an adapter)
●
Wireless frequency: 433MHz±20KHz
●
Operang range: 300m/1000 (without obstacles)
●
Receiver’s ring volume: Over 100dB within 0.5m/1.6
●
Working temperature: -20°C ~ 50°C
PIR Sensor:
●
Power supply: DC 4.5V (3 x AAA baeries)
●
Detecng Distance: up to 6 meters
●
Detecng Angle: 60 degrees
●
Working Temperature: -20°C ~ 45°C
●
Waterproof: IP44
5. Troubleshoong:
Most issues that arise can easily be resolved by changing
sengs or reseng the driveway alarms. Use the table
below to find your exact issue and possible soluon for it.
SoluonIssue Cause
Confirm that the receiver/sensors
are on. The receiver should play a
melody when the melody buon
is pressed.
The LED indicator on the sensor
will turn on when it is acvated.
The alarm
is not
being set
off
Receiver /
Sensors not
powered on
Loading ...
Loading ...