Loading ...
Loading ...
Loading ...
- 06 - - 07 -
C. Wave your hand before the PIR sensors to acve the PIR
sensor. You will hear an alarm/melody sound if pairing is
successful.
Wave hand in in front of the PIR sensor to acvate it, the
working indicator will turns on meaning the PIR sensor
was acvated.
A alarm/melody sound will play indicator that pairing is
successful.
You also can acvate the PIR sensor again to confirm it has
been added to the receiver already.
Same steps to add more sensors to the alarm receiver. The
driveway alarm receiver can support up to 4 sensors per zone,
for a total of 16 sensors per receiver.
Note:
Pairing mode will stay acve for 15 seconds aer the
sound of the ‘Beep’. If you don’t hear an alarm/melody sound,
repeat the pairing process and make sure that the selected
zone number is on when you acvate the sensor.
Note that only one solar LED light or PIR sensor for one zone
can be paired at a me.
3.4 Choose an Alarm Melody for the Sensors
The alarm melody for Zone 1 can be customized, while melodies
for Zone 2, Zone 3 and Zone 4 are fixed and cannot be changed.
Zone 1: Press the Melody buon to cycle through the available
melodies and stop on the desired.
melody to select it.
Zone 2: DingDong melody. As the “dingdong” sound is similar
to a doorbell melody, we suggest the Zone 2 sensor be
placed in a low security area such as the entrance of
the garden.
Loading ...
Loading ...
Loading ...