Loading ...
Loading ...
Loading ...
- 10 - - 11 -
3.6 Installing the Receiver
The receiver can be placed on any indoor flat panel or mounted
on any type of surface using the supplied screws.
1. Use a pencil to mark the locaon of the two mounng holes
on the surface where the receiver will be installed.
2. Drill out the pilot holes and gently tap the wall plugs into the
pilot holes using a hammer unl the wall plugs are flush with
the mounng surface.
3. Push the screws into the wall plugs, then hang the receiver
on the screws.
1
2
Note:
1. Please install the sensors ghtly to ensure the posion
and the direcon will not be easy moved by wind.
2. Please point the PIR sensor towards a open field.
(not towards the trees or bushes)
3. Please point the sensor to the main detecng area. Like
the entrance of the driveway or walkway etc.
Loading ...
Loading ...
Loading ...