Loading ...
Loading ...
Loading ...
- 12 - - 13 -
Flash Mode --- Press the Alert Mode buon twice; only the
Zone LED indicator will turn on.
Sound+ Flash Mode --- Press the Alert Mode a third me;
a Beep sound will play and the Zone LED indicator will turn
on. This Alert Mode is the factory default seng.
Note:
●
When you do not want to be disturbed or the user has a
hearing problem, we suggest seng the alarm receiver’s
Alert Mode to “Flash” mode.
●
When one PIR sensor is triggered, the LED indicator will
display the zone number and the alarm melody will sound.
When more than one sensor from 2 different zones is
triggered at the same me, the receiver’s LED indicator will
display both zone numbers alternavely for about 20 seconds,
while the alarm melody of the more recent triggered zone
will play. During this 20 seconds, if other PIR sensors triggered,
the receiver will not alarm.
3.8 Manufacture Default Sengs
If the receiver rings but the PIR sensor has not been triggered,
or the PIR sensor interferes with another receiver, it may be
necessary to wipe the current pairings and pair again.
To return the receiver back to default seng, press and hold
the pairing buon 3 seconds unl a ‘BEEP’ is hear. The receiver
will BEEP five mes and the LED indicator will display “8” to
indicate all pairings have been removed from the receiver.
Aer unpairing, the receiver can be paired again to a PIR
sensor.
Note:
The working distance for the receiver and PIR sensor is
300m (1000) without obstacle, Always test the working
distance between the PIR sensor and receiver before
installing these units.
3.7 Selecng the Alert Mode for the Receiver
When the PIR sensors are triggered, the alarm receiver can
alert you with an auditory sound, a flashing zone LED
indicator, or sound and flashing zone LED indicator together.
These are referred to as Sound, Flash, and Sound +Flash
modes.
To select an alert mode, press the Alert Mode buon to cycle
through the modes. Stop pressing the Alert Mode buon when
you reach the alert mode you want to set.
The factory default seng is Sound+ Flash mode.
Sound Mode --- Press the Alert Mode buon once; a Beep
sound will play but the Zone LED indicator will not turn on.
Loading ...
Loading ...
Loading ...